The Force is Strong"R" With This One

50 Deep

SVT JEDI
Established Member
Joined
Jul 13, 2009
Messages
3,427
Location
sacramento
[bcolor=transparent]
Making some progress with the suspension install. Took a trip up to Sonoma to meet the man Bruce Griggs himself. Pretty cool experience to wander around the shop a bit. Had some good conversation, learned a lot about the science behind the suspension components, and then headed back home. Lots of goodies
[/bcolor]
[bcolor=transparent]
[/bcolor]
[bcolor=transparent]
6606893-A-1-FC0-4-F77-923-B-C172-E5-B9-A5-E2.jpg
[/bcolor]
[bcolor=transparent]
[/bcolor]
[bcolor=transparent]
I spent a little time assembling the coil over kit on the Griggs Racing Varishock. Also did the install on the rear bump stops.
[/bcolor]
[bcolor=transparent]
[/bcolor]
[bcolor=transparent]
CEDB5-E38-2-E29-48-C5-9-B2-A-7067870-A1-F6-A.jpg
FB0-BAE3-E-1-BBB-4-D39-911-F-95-C6-FE81-A449.jpg
98976-EF0-1-D52-490-D-9921-C737-F5278407.jpg
2-E9284-C6-386-C-4-B5-A-AB75-BA7-B9-C83-D98-E.jpg
[/bcolor]
[bcolor=transparent]
[/bcolor]
[bcolor=transparent]
I found a good deal on some Koni yellow double adjustable struts locally and they will be used for the front coil over kit. Not going overboard on the front as an SLA is in the future. I will say that I miss the days you could find anything you needed for a Foxbody build on Craigslist for pennies on the dollar and at a moments notice.
[/bcolor]
[bcolor=transparent]
[/bcolor]
[bcolor=transparent]
DA9-FF757-D511-4-CDC-9-C0-E-98-A12-D06-FE52.jpg
[/bcolor]
[bcolor=transparent]
[/bcolor]
[bcolor=transparent]
New 18” Signature Wheel Reserved SV902 came in. These are an 18x9 / 18x10 4-lug direct bolt on to any Foxbody. Designed to fit with only removal of the rear quad shock while sporting 255/35/18 & 285/35/18 Michelin Pilot Sport 4S. Got the tires mounted thanks to Premier Mobile tire that came to the house. Then I did some test fitting and love the look. Weights came in at 20/22 lbs which will be great for track use and an overall more enjoyable and nimble car.
[/bcolor]
[bcolor=transparent]
[/bcolor]
[bcolor=transparent]
D0371704-6-B62-41-F3-B231-A80190-C9-CC82.jpg
4647-D496-7020-4-BF4-913-B-A5998-D94-AF3-A.jpg
EA5-DFA46-920-D-4-B91-AC47-CF3-AF7-B70-ED2.jpg
5-EC21835-DED0-4-E52-8-FD4-639-E8-E3-A0-A60.jpg
[/bcolor]
[bcolor=transparent]
[/bcolor]
[bcolor=transparent]
I also built a set of Signature Wheel Flagship Series FOUR for my brothers 86 coupe build. He will have an IRS setup and narrower front fenders so these are an 18x8.5 / 18x9.5. Weighing in at 22lbs each they will be an excellent lightweight wheel for street/track use.
[/bcolor]
[bcolor=transparent]
[/bcolor]
[bcolor=transparent]
1-C645316-FB8-E-432-C-A12-C-EB2776-B55-DA4.jpg
99-E8637-E-3-DE0-4-DD8-BA56-CEBC3-C45-E8-A3.jpg
[/bcolor]
[bcolor=transparent]
[/bcolor]
[bcolor=transparent]
Had to do a quick test fit so I could sleep that night.
[/bcolor]
[bcolor=transparent]
[/bcolor]
[bcolor=transparent]
9-E1-B1-A61-BA54-4-C11-B168-933318-C61792.jpg
[/bcolor]
[bcolor=transparent]
I wanted to update the car to modern standards so I ordered some Redline Hood/Hatch Struts. These little things go a long way
[/bcolor]
[bcolor=transparent]
[/bcolor]
[bcolor=transparent]
C1-E35-ACD-AF5-A-47-CA-BB38-887-F29-F8-DD39.jpg
BC372036-85-F2-463-F-BBB4-BED777081-C32.jpg
[/bcolor]
[bcolor=transparent]
[/bcolor]
[bcolor=transparent]
[/bcolor]
 

50 Deep

SVT JEDI
Established Member
Joined
Jul 13, 2009
Messages
3,427
Location
sacramento
[bcolor=transparent]Next up was to get the suspension setup ready for install. On the rear you will find the Griggs Racing setup is very well constructed. I upgraded the lower shock mounts to accommodate the added load being placed on them. This required enlarging the bolt holes to fit the larger grade 8 hardware from Griggs.[/bcolor]
[bcolor=transparent] [/bcolor]
[bcolor=transparent]
ED4-A21-DE-C5-E3-4-D94-B05-A-21-F48-EADEC29.jpg
[/bcolor]

[bcolor=transparent] [/bcolor]
[bcolor=transparent]The upper shock mount comes with a custom perch to mount the spherical shock bearing too. This allows for more movement and less bind. Some simple trimming with some snips gives you the room needed to get it installed.[/bcolor]
[bcolor=transparent] [/bcolor]
[bcolor=transparent]
457-C61-C4-E74-F-4-DF9-8635-2-EF211-F8-F09-E.jpg
[/bcolor]
[bcolor=transparent]Snuck out to get the Carters Customs rear diffuser mounted. Easy enough task and really like the rivnuts. Although I spent almost 2 hours trying to figure out how to properly use the rivnut gun that I bought.[/bcolor]
[bcolor=transparent]
CDBA72-CE-FDB9-4-ECA-B6-CC-471425023310.jpg
BFDC5-AC4-E9-BE-407-A-B576-DF00396-CD67-B.jpg
[/bcolor]
[bcolor=transparent]Can’t have the rear diffuser without a matching Carters Customs front splitter…[/bcolor]
[bcolor=transparent]
96-C01-C2-D-1410-487-A-8745-B30-CB9-CB001-B.jpg
[/bcolor]
[bcolor=transparent]Over the course of time spent on the rear suspension the new Baer brakes arrived. This is the 13” 6-piston front setup and 13” 4-piston rear with internal parking brake. Slotted rotors were selected to hold up to track use. I selected Baer as they are one of the only manufacturers to have a 4-lug brake upgrade. I have also had a hard on for their Arizona copper caliper color for years. [/bcolor]
[bcolor=transparent]
E9648-D43-BBD2-40-CD-A7-D8-3-E095-D066-C77.jpg
A0-D38-D2-A-18-FE-4176-9666-A7-B9-C2-E5-BB59.jpg
2-A3196-A6-CC82-41-FF-9-FE3-E5787-D4331-D2.jpg
75-BA8630-1052-4-A53-9441-7-FF88-F0-DB09-F.jpg
62934-F03-29-CB-4796-96-DE-8-C256-D739-AA3.jpg
1-A558-F97-C6-F9-4875-AD6-E-DE89-C413-AA8-E.jpg
[/bcolor]
[bcolor=transparent]This brake setup comes on a custom spindle that is beefier than the OEM piece. You can also select to have the spindle assembled with a larger hub bearing to withstand the abuse of track time. Naturally I went for that option.[/bcolor]
[bcolor=transparent]BAER[/bcolor]
[bcolor=transparent]
9170-C7-C1-F19-F-436-E-BAA2-2472380228-BB.jpg
87808643-67-DF-479-A-AB90-DD876-A975-DF7.jpg
89-C8010-D-3070-4-A11-B254-D78849-E41825.jpg
[/bcolor]
[bcolor=transparent]OEM[/bcolor]
[bcolor=transparent]
2794-D429-8-A4-C-403-B-82-D6-ADFB0-D6-B0-CD0.jpg
[/bcolor]
[bcolor=transparent]Since the rear axles had to be removed to dump the OEM brakes I went ahead and bought the Ford Performance carbon fiber clutch packs to rebuild the posi unit. This was my first time rebuilding a posi unit on my own, and thankfully it was a rather smooth process. Basic hand tools, a mallet, and some YouTube videos gave some tips on how to complete the process and get the S-spring back in. Compressing the spring with vice grips and then using a small wrench to prevent them from expanding was cool.[/bcolor]
[bcolor=transparent]
F3-AC40-E1-3596-4-DE5-AF39-C7959-E45571-B.jpg
8-AAA714-C-BC10-4-F43-8954-D0-DB4-FEE07-CF.jpg
[/bcolor]
[bcolor=transparent]Went ahead and upgraded the wheel studs to ensure they would be strong enough for track use. ARP units were selected for the task and the finish. I found that trying to press in the studs using an impact gun damages the finish. Ended up buying a press from harbor freight and doing it that way. If I end up buying components new again I will spend the extra money to have the manufacturer press them in.[/bcolor]
[bcolor=transparent]
88657-DE8-9332-4-FCD-9-D96-EBDA70-D45010.jpg
[/bcolor]
 

50 Deep

SVT JEDI
Established Member
Joined
Jul 13, 2009
Messages
3,427
Location
sacramento
[bcolor=transparent]Finally got all the components installed and time for fluid to be put back in the system. New Griggs Racing rear diff cover, torque arm plate, and redline fluid are set. Decided to upgrade the transmission mount as well with a Stifflers piece.[/bcolor]
[bcolor=transparent]
F217039-F-AE39-43-C6-AA0-A-BD42-A6475658.jpg
0411-F96-E-082-C-4-A35-98-B4-60-E988-DA5-B51.jpg
3-A7-FAA7-F-4-A81-4-AC4-90-EC-D60-F593-C1508.jpg
[/bcolor]
[bcolor=transparent][/bcolor]
[bcolor=transparent]The brake install ended up being a total pain the ass. The Baer components went on just fine, but the car fought me along the way. Both the front brake hard lines were adamant about staying with the OEM brake lines. Stripped both the front hard lines trying to get the off. Several days of trying to cut and flare my own lines were time wasted. Initially I talked myself out of buying new pre-bent front hard lines, and that was a mistake. Went ahead and spent the money for new ones and within 2 hours I was done. Highly recommend that for anyone who finds themselves in the same boat. Chose to use the 1” Baer remaster and keep the OEM booster. Installation was pretty straight forward but still used the MM adapters for the 3-2 port conversion. The maximum motorsports pieces aren’t designed for the Remaster so I still needed to custom bend some lines. I may end up doing some custom stainless-steel braided lines from the master cylinder in the future.[/bcolor]
[bcolor=transparent]
17858-A2-D-AD39-4-AA9-BF46-47-BB8025-B214.jpg
[/bcolor]
[bcolor=transparent][/bcolor]
[bcolor=transparent]Got the car out to the alignment shop on its maiden voyage. In some ways I don’t miss the uneasy feeling of taking a Foxbody out on the street for the first time after working on it. However, the feeling of building something with your own hands is rewarding.[/bcolor]
[bcolor=transparent]
7-E14169-E-5-D01-423-C-9525-0-B32178-CDAD5.jpg
[/bcolor]
[bcolor=transparent][/bcolor]
[bcolor=transparent]I still have some brake bleeding and adjustments to make but here are some pictures of how it sits now. Really pleased with the Carters Customs LX Street front splitter and rear diffuser. Looking forward to the side splitters he is developing and should be out soon.[/bcolor]
[bcolor=transparent]
AFD4-C7-F4-EFF6-4-D32-8881-A95-D255-E534-F.jpg
AF0-BA869-7-B37-4-A3-A-8-A71-0-A8-C3363-DD3-E.jpg
33-BBB225-DA77-4-EF9-B7-FF-5-B380187-A36-A.jpg
95-BFD0-B9-175-D-4-AF0-8894-E6-EFA0283501.jpg
34509-FC2-9-BCE-44-EC-B641-8-C4-CB4174284.jpg
2471-D133-EB76-4-DE5-B985-C01317-EB3486.jpg
8-A9-F1-BB1-8978-496-A-B984-80-C878251059.jpg
[/bcolor]
[bcolor=transparent][/bcolor]
[bcolor=transparent]And of course, what is a hatchback Foxbody without the Steeda Aero spoiler….[/bcolor]
[bcolor=transparent]
078-F1276-B712-4-A04-92-C3-00-FF0-DAF66-A0.jpg
[/bcolor]
[bcolor=transparent][/bcolor]
[bcolor=transparent]If you like the wheel/tire setup let me know. Now that I have accomplished the goal of building this all around 4-lug setup I am likely going to build a maximum fitment one. Good time to jump in on these if you want. More to come in the future. Forgive any pics oriented the wrong way. This free pic uploader is well…… free….[/bcolor]
 

50 Deep

SVT JEDI
Established Member
Joined
Jul 13, 2009
Messages
3,427
Location
sacramento
Things have been a little busy to say the least.

The Foxbody is at Griggs Racing for the completion of the suspension install. Also got the new Carter’s Customs side skirts on.

5DCF928A-F5CC-4406-BBA9-DE0927E801E3.jpeg
425213FB-6A7E-4B80-BF91-8465AF4BC6A6.jpeg


Picked up a Raptor that I built a set of Signature wheels for. This truck is a friggin BLAST!

28699D6A-F0A8-429E-AE36-C2E78C8C495E.jpeg
8319999A-E23B-47EE-90F8-11C07F274CA3.jpeg
7718EAD9-6679-4A6A-8889-318ADC3185DB.jpeg
4C64DD92-048C-4953-94B4-E22F937CBF35.jpeg


The GT350R is about to get a set of lowering springs, GT4 style hood vent from Carters Customs, and a new set of our Signature Wheel Royal Series SV801.

CC93D358-B5AC-437F-95EC-9B20B7B4EE0A.jpeg
C1206BFF-3E24-4A5C-AD86-A91D13E47AB7.jpeg


I love this car world we live in
 

biminiLX

never stock
Established Member
Premium Member
Joined
Jan 17, 2003
Messages
13,253
Location
Toledo, OH
Nice collection.
Any more pics of the LX side splitters?
So when does the LX get Coyote swapped?
-J
 

50 Deep

SVT JEDI
Established Member
Joined
Jul 13, 2009
Messages
3,427
Location
sacramento
2020 GT500 brakes are massive.

Swap is going well with minimal issues encountered. Learned a few things I didn’t know. Happy that brake caliper clearance issues will be solved for the GT500 guys, and the Caliperfexion studs are reusable.

Still need to swap the other side, swap lines, and bleed the brakes

135D3D1C-4AE6-4A53-81B0-A48EBB1A1B44.jpeg
308D9DC3-6915-4DF8-BDAD-02A0E7C18EE8.jpeg
CA083330-9035-4221-8440-71FFEB04435C.jpeg
B36A5AF7-F280-429D-B704-BC35401CADF4.jpeg
8905758F-4030-4945-AADB-3927E4B83F36.jpeg
AA9E5FB0-C28B-44E4-989C-BC6E29FB4286.jpeg
 

50 Deep

SVT JEDI
Established Member
Joined
Jul 13, 2009
Messages
3,427
Location
sacramento
16.5 inches of bite your freaking steering wheel. Car stops HARD with the new 2020 GT500 brakes. Looking for a track day to go do some more testing. Preferably side by side with another GT350 and GT500.

Going to attempt a full tech write up on the swap soon.

EEF2CFD4-AADA-4733-843E-92B6F19694D5.jpeg
20592747-DF92-427F-A94E-70D6589D1CA6.jpeg
51A70F6B-B35D-475C-B1B6-9D590F35EF24.jpeg
 

ANGREY

Well-Known Member
Established Member
Joined
Oct 24, 2017
Messages
553
16.5 inches of bite your freaking steering wheel. Car stops HARD with the new 2020 GT500 brakes. Looking for a track day to go do some more testing. Preferably side by side with another GT350 and GT500.

Going to attempt a full tech write up on the swap soon.

View attachment 1616865 View attachment 1616866 View attachment 1616867
50,

Can you post up the details of this swap for the rest of us, perhaps in it's own dedicated thread.

1) Parts involved, cost, where you procured them from, etc.
2) Clearance challenges? I'm assuming that the 20" Signatures clear, but by how much, is it safe to say that most 20" will clear or is the clearance with Signatures tight?
 

DSG2003Mach1

Well-Known Member
Established Member
Premium Member
Joined
Apr 15, 2004
Messages
15,911
Location
Central Fl
damn those are some big brakes - so those are 2020 gt500 calipers on 350 rotors right? I thought I remembered seeing the gt500 going to an 18" rotor
 

ANGREY

Well-Known Member
Established Member
Joined
Oct 24, 2017
Messages
553
damn those are some big brakes - so those are 2020 gt500 calipers on 350 rotors right? I thought I remembered seeing the gt500 going to an 18" rotor

16.5" rotors up front 14.5" rear. Bigger in the front, smaller in the rear than the 350. They also went to a non slotted/drilled disc as they apparently discovered it didn't do much other than speed up wear.
 

50 Deep

SVT JEDI
Established Member
Joined
Jul 13, 2009
Messages
3,427
Location
sacramento
Been missing the GT350R lately. Had to throw it in storage for a while as I sorted out other projects. Brought it home to finalize a few things before bringing it back out with its new look. Hope for some fun track days this year.
.
Been tweaking the suspension with the DSC Sport Controller which has been fun. I swapped in the 16.5" 2020 GT500 brakes a while back but did not want the weight penalty. Sooooooooo I changed the front to the Racing Brake Carbon Ceramic 2020 GT500 front 16.5" rotors and street compound pads.
.
Currently sitting on our Signature Wheel Royal Series SV801 in Brushed Bronze Tinted. This is a maximum fitment with a 20x11.5 square, 315/30/20 Michelin 4S at all four corners, and DEEP concave.
.
The 2021 iteration should be quite impressive with a few goodies from Archetype Racing

SV801 GT350R Brushed Bronze Tinted (3 of 15).JPG
SV801 GT350R Brushed Bronze Tinted (6 of 15).JPG
SV801 GT350R Brushed Bronze Tinted (11 of 15).JPG
SV801 GT350R Brushed Bronze Tinted (13 of 15).JPG
 

662

Active Member
Established Member
Joined
Mar 31, 2014
Messages
238
Location
Houston
Hey - I was scrolling thru pics of your beautiful car and noticed the shipping spacers were still installed... My dealer prepped my car and missed these it took me 2 months of pounding before I found a thread where a guy bought a used GT350R and found them still in it. I guessed that was part of the reason the first owner traded it in, rides pretty harsh with these installed.

How log did it take you to remove these ?
Capture.PNG


Cheers
 

Users who are viewing this thread



Top