So Im running a 3.12 pulley with my vortech on my 98 Cobra. Does anyone know what belt size I need? and what are some good choices for belts out there? I would really like to pick 2 up and have a spare.
Need help with belt size
- Thread starter DaveWertz
- Start date
I have a 3.33 and run a 112.5 it's probably really close or the same for your pulley
Sent from my Pixel 3 XL using Tapatalk
Sent from my Pixel 3 XL using Tapatalk
anyone have part#s for a 112.5" belt. Looking at the gates green belts.
Not that I can help, but knowing which crank pulley and tensioner pulley used will change it. I’m using
K081131hd 113.34” belt but I have a 10% overdrive crank pulley, 76mm idler, and 2.75” blower pulley.
I worked at a shop, so it was easy for me, I just had the local orielly’s order a bunch of belts and then returned the ones that I didn’t use. Started with a piece of string to get a rough idea on length.
K081131hd 113.34” belt but I have a 10% overdrive crank pulley, 76mm idler, and 2.75” blower pulley.
I worked at a shop, so it was easy for me, I just had the local orielly’s order a bunch of belts and then returned the ones that I didn’t use. Started with a piece of string to get a rough idea on length.
Last edited:
Users who are viewing this thread
