What is the name of this plug on the throttle body?

HPLouis

Well-Known Member
Established Member
Joined
Sep 27, 2002
Messages
1,708
Location
New York City
Does anyone know what the name of this plug or the part number for it is? I was replacing my throttle body and broke a clip. Now I have to replace it.

ford-racing-gt500-throttle-body-010.jpg


IMG_2355.JPG


IMG_2357.JPG


IMG_2358.JPG


IMG_2360.JPG


IMG_2361.JPG


IMG_2366.JPG


IMG_2368.JPG


Thanks


Sent from my iPad using the svtperformance.com mobile app
 

HPLouis

Well-Known Member
Established Member
Joined
Sep 27, 2002
Messages
1,708
Location
New York City
It’s for the electronics to control the throttle body.
TPS is on the other side if my logic is correct

I broke the clip so I have to replace the connector. I've been google searching and I can't find it. Would the dealer carry it? I just need the connector and I can use a pin extraction tool to swap the pins to the new connector.
 

HPLouis

Well-Known Member
Established Member
Joined
Sep 27, 2002
Messages
1,708
Location
New York City
You sure you actually broke it? You talking about the red part? If so, it just slides back in.

Yeah, for the larger connector, on the opposite side, pulling the red part was all I needed to do. It slid right off.

For this side, under the red part, was a clip that I was supposed to lift with a small screwdriver but I didn’t see it and when I pulled the connector off, it broke.
IMG_2375.JPG


So now, because that piece in my hand is off, the clip is unsecure. I ordered a new 2 pin connector and the dealership is getting it tomorrow. Once I have it, I’ll extract the pins from the connector and set it in the new one and everything will be fine.


Sent from my iPhone using the svtperformance.com mobile app
 

HPLouis

Well-Known Member
Established Member
Joined
Sep 27, 2002
Messages
1,708
Location
New York City
Thanks everyone. I was able to pull the pins out the old connector. The new one didn't have the red part and I was able to swap that from the old to the new.
 

Users who are viewing this thread



Top