MMR has some. Not sure which cams I'm going to run on my new build but probably their's depending on what other manufacturers say. Most cams are going to be for blower cars, obviously.
Running comp stage 3 blower cams. They make great power and , I think, they sound pretty wicked. You can skip to 50 seconds to hear them, also, this is through stock mustang gt mufflers. Albeit with long tubes and gutted cats.
Anyone have any more info on turbo cams? Trying to figure out what a good duration intake/exhaust would be. I've got a couple sets of cams to pick from....just trying to work it all out and see what's best.
4.6 turbo cams will apply to 5.4 builds.
If you’re going custom, probably try and buy direct from Accufab Racing. Can’t hurt to ask. Next would be a call to L&M or MPR as they have built/specd many turbo 4.6/5.4/5.8
On my turbo builds, building the motor as if it were NA then adding turbo boost seems to work very well.
-J
So I've got a set of supercar GT cams that I'm told are pretty good for the turbo cars. But, ive also got some stage 3/4 MMR cams that are .495 lift and 244* on both intake and exhaust. Super choppy, but thinking too much overlap?