Best Clutch for 700 RWHP
- Thread starter nickstobias
- Start date
Stock ‘13-14
But what are you doing with it? Street, Drag?
-J
But what are you doing with it? Street, Drag?
-J
If street only the 13/14 gt500 oem clutch flywheel slave will work for your needs. If you were drag racing i would recommend mcloud RXT.
I recently installed a McLeod RXT clutch , new slave cylinder , and pilot bearing and just finished the break in period. Making 725 rwhp and no issues feels amazing.
If you want aftermarket, I’d recommend X-Clutch as they’re new to the market but very experienced in Australia, even more than Mantic. Their kits are fully complete, no need to buy slave cylinders or even flywheel bolts.
Still, for a strictly street car, OEM is hard to beat.
-J
Still, for a strictly street car, OEM is hard to beat.
-J
My set up as well with similar HP. New slave/pilot is good insurance. I also opted for an ALFW. All street driving with a whole bunch of spirited rolls
->). No issues with my RXT. Love it.
For street, 13-14 Clutch and slave. I have an RXT and its very good at holding power, but I call bullshit on their claims that its lighter than stock. After about 25k miles on it, Id call it same as stock feel.
Spec SS trim in my 11, no chatter..
I have slight chatter when I press the pedal in. None once its let out. Is that bad?
That clutch grabs and holds very very well.
I passed on McLeod for several reasons.
I was at the 900 mark and stock 12 clutch held for a while. Im planning to get to the 1000 hp mark this spring and opted for the dyad centerforce. Have not tried it yet but reviews say it holds 1300 hp and easier than stock pedal effort. Not a drag clutch. organic material.
I did the RXT might as well do it right the 1st time and if you go for more power later which most do then your already there.
Users who are viewing this thread
