Modifying inlet kenne bell project!

wirelessguy2005

Active Member
Established Member
Joined
Mar 10, 2019
Messages
168
Location
NE Indiana
Had a set of Ford performance wires on the car but they went bad in short order so I put on a set of factory wires for awhile and then Switched over to a set of Accel wires which have been working good so far.

What wires are you running?


Sent from my iPhone using svtperformance.com
 

venom1997

Screwed by the Twins
Established Member
Joined
May 29, 2008
Messages
5,887
Location
albuquerque new mexico
Had a set of Ford performance wires on the car but they went bad in short order so I put on a set of factory wires for awhile and then Switched over to a set of Accel wires which have been working good so far.

I was going to say because mine are already going bad I have a miss and stumble I can’t complain I got them 10 years ago from tously ford for like 39 bucks lol but I did research and seems the frpp cause a miss


Sent from my iPhone using the svtperformance.com mobile app
 

wirelessguy2005

Active Member
Established Member
Joined
Mar 10, 2019
Messages
168
Location
NE Indiana
Yep, when my FRPP wires started acting up it was causing a miss. Luckily mine were still under warranty so Summit refunded me.

I was going to say because mine are already going bad I have a miss and stumble I can’t complain I got them 10 years ago from tously ford for like 39 bucks lol but I did research and seems the frpp cause a miss


Sent from my iPhone using the svtperformance.com mobile app
 

wirelessguy2005

Active Member
Established Member
Joined
Mar 10, 2019
Messages
168
Location
NE Indiana
Update, I was able to get my car back on the Dyno and at 13 lbs of boost on e85 with the modified inlet I was able to make 514 whp and 444 tq with a very conservative tune. This is with a bone stock motor. I will be installing my new forged motor over the winter and testing will continue in the spring. I am Shooting for 650 + whp with the KB 2.1 and my modified inlet.
 

venom1997

Screwed by the Twins
Established Member
Joined
May 29, 2008
Messages
5,887
Location
albuquerque new mexico
Good to see this got you some power!!! I’m looking at spray a 75 shot to cool the blower even more should be well on my way to 650+


Sent from my iPhone using svtperformance.com
 

Users who are viewing this thread



Top