Maf options...MAFia or sct ba2400

96mystic#899

Member
Established Member
Joined
Nov 20, 2012
Messages
105
Location
NYC
Hello all. 96 cobra w/vortech v1 3.24 pulley, lightning maf, anderson pp, 60lbs inj, 340 pump....so my maf is pegged.
Should I change to a sct ba2400 or a diablo MAFia.

Thank you all.



Sent from my SM-N950U using Tapatalk
 

DaveWertz

Active Member
Established Member
Joined
Mar 24, 2019
Messages
421
Location
Hughesville Pa
For the money I would upgrade to a SCT BA. Just curious what HP did the lightning maf peg at? If you have facebook there are a ton of SCT BA on there fairly cheap.
 

Helomech74

Well-Known Member
Established Member
Joined
Dec 24, 2007
Messages
2,470
Location
Tennessee
Neither. I would consult Pro-M and talk to Chris about your needs. I'd personally look into the Pro-M 3" Pro tube if you're running a blow through setup.
 

96mystic#899

Member
Established Member
Joined
Nov 20, 2012
Messages
105
Location
NYC
For the money I would upgrade to a SCT BA. Just curious what HP did the lightning maf peg at? If you have facebook there are a ton of SCT BA on there fairly cheap.
Just over 400 to the wheels on a very conservative tune

Sent from my SM-N950U using Tapatalk
 

96mystic#899

Member
Established Member
Joined
Nov 20, 2012
Messages
105
Location
NYC
In that case I would run the Pro-M 92, or convert to blow through and run the 3" pro tube.
That's what I should have gone with from the onset of this adventure. I'm just trying to stay in the 420-430 range.

Sent from my SM-N950U using Tapatalk
 

Users who are viewing this thread



Top