MY20 GT500 eSourcebook Available
- Thread starter 13COBRA
- Start date
Here it is:
http://svtperformance.com/forums/images/svtperformance/SVTPerformance2020ShelbyGT500eSourceBook.pdf
http://svtperformance.com/forums/images/svtperformance/SVTPerformance2020ShelbyGT500eSourceBook.pdf
Last edited:
I tried, but it shows it's loading..then it goes away.
I will email it to you, and you can try.
I'll take it.. Thanks!(you have my email)
Courtesy of Nick (13Cobra)
These were the important things to me.
These were the important things to me.
Last edited:
Now that we have the transmission ratios, I was able to make up a speed chart. It should be good as long as I got the rear tire diameter correct.
3.73 Rear Gears
4.10 Rear Gears
4.30 Rear Gears
3.73 Rear Gears
4.10 Rear Gears
4.30 Rear Gears
Last edited:
It looks like the 2020 GT500 transmission ratios are the same as those listed on Tremec.
The tire profile 35% is not correct, it should be 30%.
Who's the guy telling me it only had 2 overdrive's?
If I remember correctly I said that it could also have 2 overdrives. and I showed an example of a 2 overdrive 7 speed DCT Tremec.
caught that after the fact, didnt change anything enough to repost
Only other thing I see is the drag coefficient at .32 should probably be about .35 to .36
Great spread though, looks meaty!
Considering the 4225lbs curb weight, and 4400lbs weight with driver, I fully expect the carbon handling cars with the aero pulled to trap north of 135mph and weigh abought 4150 so 4300lbs with driver. With aero probably 131-132.
The quickest and fastest cars will be setup as carbon cars with the aero yankee imo. The 0-60 would be sub 3 if it had a 60mph 1st gear.
Heavier than I’d like but hey, it’s what it is.
That’s a very conservative and realistic dyno spread
...
Last edited:
Users who are viewing this thread
