Parting 99 Gt built 4.6-kenne bell-built auto trans-built rear end

cobra94svt

Member
Established Member
Joined
Apr 10, 2007
Messages
551
Location
Cleveland, Ohio
I have a 4.6 here with approx 7000 miles since build..

Manly 18cc dish Pistons
Manley H beam rods with 2000 series rod bolts
8 bolt forged crank
Arp main studs
Melling billet oil pump
7qt oil pan
PI heads all redone
Cometic head gaskets
Arp head studs
ATI super damper/balancer

Tensioner is NOT INCLUDED or the wiring and accessories, I have them if needed we can work it out.

Great running and driving engine, I drove it and have videos showing no issues, Noah Gt car for parts and taking apart, as is no warranty, can be fully inspected with cash in hand buyer if serious, I removed pan to verify internals
3500.00 Cash only no checks, pick up only also..44138 Ohio, I do not ship these as I want buyer to see and be happy. Text for videos 440-476-4114


I also have a kenne bell 2.6 big bore blower here, comes as seen in pics, polished series, upgraded pulley (not sure boost) made 505 rwhp on a 2v engine with stock cams, has a SCT BA3000 meter, chrome intercooler tank, all bolts are in bag, I have the manual for it also. good working condition as I drive the car and have videos feel free to text me 440-476-4114
No warranty of any kind feel free to pick it up in person to inspect it and check it all out, I have perfect feedback all over the place.

aeromotive Fuel system I have a full fuel system here from a 99gt, automotive rails for 2v engine, had a kenne bell, FORE fuel hat with twin GT supercar fuel pumps whole system 750.00 plus ship, no tank

3800.00 plus shipping rather do pick up as shipping these SUCK! But I will ship... normally takes 3 boxes so Shipping can get expensive and you pay that cost.
I have a good perfect working and shifting 4r70w trans here from a built 99 mustang Gt, from my research it has a dirty dog billet converter 32-3500 stall, shift kit air valve body, 1pc input shaft, I am sure internal clutches are upgraded also car had 500+ to tires, I am not that educated on autos so I am describing the best I can, also have videos of it being driven, most guys won't share that...
1500.00 picked up 44138 Ohio

I have a 8.8 here from a 99gt, has 3:73 gears, moser 31 splines into a Detroit locker, hardened long wheel studs, disc brakes. No control arms or sway bars, sold separate ...
700.00 picked up 44138 Ohio
kenne%20bell-2_zpsfexh2gq1.jpg

svt_zpstetvg5un.jpg

kenne%20bell-1_zpszkzlf1jn.jpg


Tons and tons of parts here... text me with any need 440-476-4114
 

Attachments

  • 99 4.6 built-1.jpg
    99 4.6 built-1.jpg
    76.1 KB · Views: 395
  • 4.6-2.jpg
    4.6-2.jpg
    57 KB · Views: 381
  • 4.6-4.jpg
    4.6-4.jpg
    82.8 KB · Views: 377
  • Bogart-1.jpg
    Bogart-1.jpg
    59.2 KB · Views: 380
  • 4.6-6.jpg
    4.6-6.jpg
    39.8 KB · Views: 391
Last edited:

cobra94svt

Member
Established Member
Joined
Apr 10, 2007
Messages
551
Location
Cleveland, Ohio
I have a set of Kooks 1-5/8" headers here with chatted x pipe, great shape no issues... come as seen not separating at moment

900.00 plus ship, for X and headers

Borla cat back 400.00plus ship

Built 8.8, 3:73, Detroit locker, Moser 31 splines and all!! 700.00 picked up 44138


more and more parts here... text me
 

Attachments

  • Kooks-1.jpg
    Kooks-1.jpg
    50.1 KB · Views: 319
  • kooks-2.jpg
    kooks-2.jpg
    74.2 KB · Views: 339
  • Borla cat back.jpg
    Borla cat back.jpg
    76.4 KB · Views: 332
  • 8.8-2.jpg
    8.8-2.jpg
    41.9 KB · Views: 346
  • 8.8-3.jpg
    8.8-3.jpg
    54.5 KB · Views: 379
  • 8.8-1.jpg
    8.8-1.jpg
    36.5 KB · Views: 327

Users who are viewing this thread



Top