DivisionX Dual Fuel Hat w/Walbro pumps

Wings65288

Well-Known Member
Established Member
Party Liquor Posse
Joined
Dec 7, 2004
Messages
5,115
Location
Fortuna, CA
Anyone know if Walbro pumps will work with a DivisionX fuel hat? I currently have Deatschwerks DW300C pumps and one went bad. They're 340LPH and was gonna upgrade to the Walbro pump and it's a 430LPH pump.

It's an E85 return fuel system from Lethal $769 (didn't get fuel pumps with order so they're the pumps I bought with the car).

This is the pump I want specifically:

TI Automotive F90000267 Fuel Pump
 

ShootyMCstabby

Brownie Hound.
Established Member
Joined
Aug 29, 2017
Messages
633
Location
Minneapolis,MN
Yes they will work. You will need to trim the first barb off the pumps inlet for them to fit. So the pumps don't bottom out in the gas tank.
You should be able to find info on it when searching the web.

That's what I did and it works.
 

testorossa1989

Well-Known Member
Established Member
Joined
Apr 12, 2011
Messages
3,668
Location
New York
Yea they were originally an option to use Walbro on division x hats. I got that setup using 465s

Sent from my SM-G930V using Tapatalk
 

Wings65288

Well-Known Member
Established Member
Party Liquor Posse
Joined
Dec 7, 2004
Messages
5,115
Location
Fortuna, CA
Yes they will work. You will need to trim the first barb off the pumps inlet for them to fit. So the pumps don't bottom out in the gas tank.
You should be able to find info on it when searching the web.

That's what I did and it works.
oh ok sweet. I thought you may have to do something like this. Thanks dude. Thanks testorossa
 

Wings65288

Well-Known Member
Established Member
Party Liquor Posse
Joined
Dec 7, 2004
Messages
5,115
Location
Fortuna, CA
Did you guys have to hardwire in your pumps? I can probably crimp/solder some connectors on and be just fine. Here's what I'm working with... The first pic is the hat, the 2nd pic is the new pump that comes with a pigtail and a connector that WON'T connect to my hat, and the 3rd is the old pump that connected no problem.

B7CB93F8-E813-4BF7-A95B-8E4D918E8EE0.jpeg

87A1A956-23E5-4719-80C0-C245131978D9.jpeg

546CBFFB-4B22-42F0-8123-D760E3BBC952.jpeg
 

Comp04svt

Active Member
Established Member
Joined
Jun 5, 2008
Messages
581
Location
Macomb, MI
Lethal sells a plug n play jumper, that is what I went with when I switched from the stryker 340 pumps to the 465's on my division x hat. They also have the correct pre filters as well. IDK if you have the division x filter or not, but make sure you pick up a metal mesh insert for it if using e85.
 

Users who are viewing this thread



Top