M122 swap

2003SVTFreak

Active Member
Established Member
Joined
Feb 1, 2016
Messages
356
Location
WPB, FL
Anyone have this done recently? Thoughts? I'm tossing the idea between that and a whipple...I'm running a 6lb lower on the stock blower. Just want to get a little more efficient and possibly a tad bit more out of the stock internals

Sent from my SM-G975U using the svtperformance.com mobile app
 

Dusten

Well-Known Member
Established Member
Joined
Jan 20, 2006
Messages
14,904
Location
Conway, Wa
Anyone have this done recently? Thoughts? I'm tossing the idea between that and a whipple...I'm running a 6lb lower on the stock blower. Just want to get a little more efficient and possibly a tad bit more out of the stock internals

Sent from my SM-G975U using the svtperformance.com mobile app

The cost to do.it correctly will put you close to a used whipple... id go whipple.
 

Grant Theft Auto

I hit deer.
Established Member
Joined
Sep 11, 2009
Messages
3,445
Location
Florida
I have, I got the blower for free from Joel charles aka JC customs CNC when I bought his billet midplate adapter.

He sells the full kit for under a grand with everything needed for the swap minus a blower.

I have a stock M122 with a 2.6” VMP pulley I would let go cheap for someone who did want to do this swap. I’m not on here often though so it’s better to reach out to me on Facebook or search of the lightning garage Facebook page for Grant Rose

Or instagram search the hashtag M122Swap and you will see pics of my setup my username is grant.218

I went with a GT500 VMP 2300 TVS last month so I don’t have use for my M122 anymore

You could buy a used whipple most likely after you have pieced together everything I.e- midplate, blower, Roush F-150 elbow, whipple cold air intake etc

There will be a lot of whipples forsale soon for guys that want the new gen4 2.9 and gen5 3.0
 

Users who are viewing this thread



Top