Few questions about going turbo

Thinking of going turbo, initially I was going to just go to a 2.9 Whipple but now I have the turbo bug.. I have a MMR 1000 short block stroker right now with all supporting mods pushing 600/550 on 93 pump gas at 15lb of boost.

My questions are what would be a good single turbo setup to get 7 to 750 hp, with the ability to turn it up or down when needed.

The car is a weekend car and taken to car shows, raced a little also need a reputable shop that does installs and tuning, not familiar enough to do a install nor do I have the time. I am in WV so out of state will be best since my state has nothing performance based that I trust to do this.

Precision 7675

Sent from my SM-G955U using Tapatalk

Turbo kit wise I tend to prefer custom built. If you are interested in going all the way out to Kansas we use a fab shop that makes some KILLER turbo kits for less than hellion kits.

Otherwise, your off the shelf options are basically on3 or hellion anymore. You can get most of a kit through cg fab but you'll have to piece together parts.

For tuning, you could always remote tune. We have used VMP/PBD/Lund remote tunes with great success.

Make sure to discuss your entire build and future plans with the shop, a lot of Cobra guys just slap a kit on and hope for the best then are disappointed when it's not what they expected.