1200WHP with VMP 2.65

CD07GT500 · May 20, 2019

VMP TVS 2650 (No Porting)
ZPE 2.3
ATI 15%
JLT148
VMP 173MM T/B
Stock iron block .005 over
Stock Crank
Fox Lake Heads with stock valves
Custom cams
Custom Diamond pistons
Molnar Rods
10.7:1
Kooks headers & Exhaust
E85

HKusp · May 20, 2019

Whoa. That TVS certainly is able to grow.

biminiLX · May 20, 2019

Serious TVS power!
Biggest SAE number I think we’ve seen from a Gen 3.
Roughly how much timing?
Strange question but what belt are you running?
-J

gt347mustang · May 20, 2019

The hell is up with that graph? Those waves are inflating the #'s

biminiLX · May 20, 2019

Big power and a soft tire but the average of the waves is usually legit.
It’s definitely north of 1100
-J

CD07GT500 · May 20, 2019

biminiLX said:
Serious TVS power!
Biggest SAE number I think we’ve seen from a Gen 3.
Roughly how much timing?
Strange question but what belt are you running?
-J

Yes to my knowledge it's the most power from any TVS 2.3/2.65 on a DJ SAE.
About *19.
I had a 85.3 blue on it but it broke on me. It was 3 years old and was probably too tight.

CD07GT500 · May 20, 2019

gt347mustang said:
The hell is up with that graph? Those waves are i nflating the #'s

Yes the top of the wave is inflated. That's why I didn't claim 1250. If you split the wave it still makes ~1200 sae. See below.

Willie · May 21, 2019

Curious how hard you're spinning the blower and what the blower redline is... I'm assuming the 2.65" pulley is the smallest available? With the 15 percent crank, you've got to be spinning this thing pretty fast...

98 Saleen Cobra · May 21, 2019

Well then.. That escalated really quickly! Congrats man!!

gimmie11s · May 21, 2019

That's gotta be a damn handfull. Holy shit.

Gonna take a manly man to pilot that beast down the track while shifting gears. HELL yeah.

Recon · May 21, 2019

That’s pretty friggin impressive!
Pretty much solidifies the fact that’s the supercharger for me if I ever get a Shelby or Coyote based Mustang.

Pick your poison.

biminiLX · May 21, 2019

Willie said:
Curious how hard you're spinning the blower and what the blower redline is... I'm assuming the 2.65" pulley is the smallest available? With the 15 percent crank, you've got to be spinning this thing pretty fast...

He has a 2.35 upper. I’m very interested as I’ll have a 2.4 upper with the same 15% lower. Not sure exactly how far past the blower redline that is, but PD blowers have shown with appropriate control of IAT2s, overspinnning adds power. More specifically, more under the curve or average torque.
I’ll have mine on the dyno soon to help validate max effort VMP Gen3 Power!
-J

boduke0220 · May 22, 2019

That thing has got to be downright violent! Hello 190+ half mile traps!

CD07GT500 · May 22, 2019

Thanks it's a handful for sure.

98 Saleen Cobra · May 22, 2019

red3v said:
Thanks it's a handful for sure.

I bet it is. How’s traction?

69b302 · May 23, 2019

red3v said:
Yes to my knowledge it's the most power from any TVS 2.3/2.65 on a DJ SAE.
About *19.
I had a 85.3 blue on it but it broke on me. It was 3 years old and was probably too tight.

Curious on the boost level, since 19 is nothing for timing. A lot left on the table at only 19 degrees.

CD07GT500 · May 23, 2019

98 Saleen Cobra said:
I bet it is. How’s traction?

What traction? lol

CD07GT500 · May 23, 2019

biminiLX said:
He has a 2.35 upper. I’m very interested as I’ll have a 2.4 upper with the same 15% lower. Not sure exactly how far past the blower redline that is, but PD blowers have shown with appropriate control of IAT2s, overspinnning adds power. More specifically, more under the curve or average torque.
I’ll have mine on the dyno soon to help validate max effort VMP Gen3 Power!
-J

Going on dyno in June?

genesmob · May 23, 2019

If your estimated numbers are correct because of all the spinning on the dyno, you should trap low to mid 160s in the quarter at over 4000lbs.

Sent from my iPhone using Tapatalk

98 Saleen Cobra · May 23, 2019

red3v said:
What traction? lol

LOL that's what I thought. Thinking changing rear gear now?

1200WHP with VMP 2.65

Klaus's Bitch

Well-Known Member

never stock

Well-Known Member

never stock

Klaus's Bitch

Klaus's Bitch

Well-Known Member

Well-Known Member

I Race Pontiacs

Well-Known Member

never stock

Well-Known Member

Klaus's Bitch

Well-Known Member

Active Member

Klaus's Bitch

Klaus's Bitch

Active Member

Well-Known Member

Users who are viewing this thread