Vortech T-trim performance numbers

Cobra52898

Muscle/Performance car junkie
Established Member
Joined
Mar 31, 2008
Messages
316
Location
North Texas
I’m looking for performance numbers from those with experience using a T-trim SC on a 96-98 Cobra. Any info would be greatly appreciated.
 

Cobra52898

Muscle/Performance car junkie
Established Member
Joined
Mar 31, 2008
Messages
316
Location
North Texas
That’s great, impressive!

What were your Torque #’s?

What kind of dyno was it verified on?

Did you get a print out of the dyno test(s)?

What fuel was being used?

I’d appreciate whatever info/data you can provide.
 

01yellercobra

AKA slo984now
Established Member
Joined
Oct 5, 2005
Messages
21,128
Location
Cali

blownstang4.6

Active Member
Established Member
Joined
Nov 8, 2011
Messages
469
Location
Chicago
What will be your setup and what fuel will you be using? 10-11.0 compression, blower cams, T trim, and E85 should be able to make 800rwhp without an issue.
 

Rev Happy

Member
Established Member
Joined
Aug 7, 2002
Messages
630
Location
Los Angeles, CA
My 96 Cobra initially made 596rwhp/450rwtq with 18 pounds of boost on 91 Octane. We installed a wastegate and capped the boost to 15 and it made around 550. The motor is built with 9:1 compression.
 

ZeroDCX

Active Member
Established Member
Joined
Sep 3, 2009
Messages
848
Location
VA
My 96 Cobra initially made 596rwhp/450rwtq with 18 pounds of boost on 91 Octane. We installed a wastegate and capped the boost to 15 and it made around 550. The motor is built with 9:1 compression.
Do you have before and after dyno sheets? I'm interested in the mid-rpm gains with that setup. Did you pulley the T-Trim for max blower rpm with the wastegate?
 

1996MysticSnake

Well-Known Member
Established Member
Joined
Jan 28, 2007
Messages
1,042
Location
PA
I'm not spinning mine that hard, 3.33 pulley stock diameter balancer and only 6200 rpm cause I'm on the stock bottom end. Also spraying meth to help keep the block together.

Made 505 at the wheel.

9fbc25ea34d917e7e7ca779edccea197.jpg


Sent from my Pixel 3 XL using Tapatalk
 

Rev Happy

Member
Established Member
Joined
Aug 7, 2002
Messages
630
Location
Los Angeles, CA
Do you have before and after dyno sheets? I'm interested in the mid-rpm gains with that setup. Did you pulley the T-Trim for max blower rpm with the wastegate?

I don't have the dyno sheets on hand, but the car ran out of fuel pump on 18lbs using a 3.3 pulley and a 10% OD balancer. I'm running a stock fuel system with a Walbro 400 pump. Final numbers with the wastegate set at 15lbs were 550/430 on a 3.1 pulley. I have an SSR stage 2 short runner so my car never made a lot of torque in general. The car does have an 03/04 T56 with 4.56 gears so it does get into boost pretty quick.
 

Users who are viewing this thread



Top