ATI 10% lower and 2.5 upper pulley installed

evasive

Pro 2A Attorney
Established Member
Premium Member
Party Liquor Posse
Joined
Aug 3, 2008
Messages
3,863
Location
FL
Power By The Hour installed an ATI 10% lower and I swapped out the stock-look 2.4 upper pulley for the VMP 2.5 with swappable pulley. I also went from the SCT handheld tuner to the Lund nGauge, which they mounted in an Autometer pillar pod. Living in FL, I didn't want to use an AC vent. Power By THe Hour and Lund were the original tuners and it was on the same DynoJet, no other performance changes. Picked up 25 rwhp and 45 rwtq. Pretty happy with the results and its a nice, safe tune. No need for max effort for my driving style and frankly, ability :) Sitting at 673rwhp and 675rwtq
 

evasive

Pro 2A Attorney
Established Member
Premium Member
Party Liquor Posse
Joined
Aug 3, 2008
Messages
3,863
Location
FL
Power by the hour modified it to work by heating it up. Not sure of the details


Sent from my iPhone using svtperformance.com
 

evasive

Pro 2A Attorney
Established Member
Premium Member
Party Liquor Posse
Joined
Aug 3, 2008
Messages
3,863
Location
FL
OK Can now barely see that it's a tvs in that vid haha… I was going to lose my mind If you were making those numbers on a stocker... anyway, sweet car OP.

Thx! Yes, running a 2013 blower with the 5.8 removed and painted black. Try to blend mods as much as I can so they don’t stand out. Here’s a quick pic of the pod. Will do more hopefully next week.
IMG_9219.JPG



Sent from my iPhone using the svtperformance.com mobile app
 

Purvis

VMP TVS Power
Established Member
Joined
May 2, 2005
Messages
1,259
Location
PA
Nice Gains Evasive.
I'm at 650 rwhp with a GEn1 TVS on a 2.4 with stock exhaust.
Was going to bump it up another notch and go for 670-720 by going to a Gen 3.
But swapping in a 10% lower sounds like a great option to keep in mind. 25rwhp , not bad!
How much did the shop charge to install/clearance the lower?
 

evasive

Pro 2A Attorney
Established Member
Premium Member
Party Liquor Posse
Joined
Aug 3, 2008
Messages
3,863
Location
FL
I'm not sure, I'll have to look at the paperwork but I think a few hundred dollars. They did a ton of other work too. The big increase was the tq, really happy with that bump.

Do you have headers? If not, watch the boost with the 2.4 and lower...that's why I went up to a 2.5.
 

einehund

Well-Known Member
Established Member
Joined
Jan 20, 2008
Messages
1,801
Location
Wentzville, MO
For reference, i've got the 2.6 upper and an IW 10% lower on a gen2r and see a little over 19 lbs of boost with an O/R h pipe.
 

da5deuce

heatsoaked
Established Member
Joined
Jun 16, 2010
Messages
8,722
Location
compton
Are you on E85 OP? I cant see your mods. I ask because I'm about to install a ATI 10% lower also. I'm hoping to crack 720+rwhp. I'm currently at 695hp 666tq. Mods are FRPP TVS, 2.5 upper, twin 67, 123 intake, ARH 1 7/8 LT's, and E85.

Sent from my SM-N960U using Tapatalk
 

sleek98

Well-Known Member
Established Member
Joined
Nov 19, 2012
Messages
2,168
Location
Kansas City, MO
Are you on E85 OP? I cant see your mods. I ask because I'm about to install a ATI 10% lower also. I'm hoping to crack 720+rwhp. I'm currently at 695hp 666tq. Mods are FRPP TVS, 2.5 upper, twin 67, 123 intake, ARH 1 7/8 LT's, and E85.

Sent from my SM-N960U using Tapatalk

Similar mods last year but a gen 2 vs the frpp and ported lower I did 755 SAE on E85 through an auto. You should be well over 725.
 

da5deuce

heatsoaked
Established Member
Joined
Jun 16, 2010
Messages
8,722
Location
compton
Similar mods last year but a gen 2 vs the frpp and ported lower I did 755 SAE on E85 through an auto. You should be well over 725.
I'm thoroughly convinced my TVS is ported based on the smoothness in the elbow leading into the blower case. I dont wana believe that I'll be well past 725rwhp, but thanks for getting my hopes up lol.

Sent from my SM-N960U using Tapatalk
 

Users who are viewing this thread



Top