Boss 302 Brembos * Full Set * Brand New $750+ shipping

MOTORCITYBADBOY

Member
Established Member
Joined
Sep 23, 2010
Messages
66
Location
Forest, VA
SOLD!!!

I have an all brand new 4-piston Brembo set including calipers, rotors, pads, and dust shields that came off a '12 Boss 302 brand new. The owner upgraded his Boss brakes as soon as he got it home..

I had planned to put them on my '12 GT, but I ended up getting a '14 Roush that already had the Brembos.

I'm sure you all know this set retails for about $1100...

Don't buy used brakes to put your beautiful high performance Mustang. Spend a few hundred more and get the all brand new parts. You will save in the long run, with more longevity, less work, and get better performance.

Brembo2a.jpg


Brembo3a.jpg


Brembo1a.jpg

SVT-Brembo5a.jpg
 
Last edited:

Rippednchipper

New Member
Joined
Feb 3, 2019
Messages
4
Location
Ohio
I tried to PM you but it wouldnt allow me to yet. Is there anyway you could send me the dimensions/thickness. From the face(brembo side) to the rear of the caliper. I would greatly appreciate it. I just need to make sure they clear my wheels, as my s550 takeoffs did not.
 

MOTORCITYBADBOY

Member
Established Member
Joined
Sep 23, 2010
Messages
66
Location
Forest, VA
I will try to get that for you later today.
What wheels do you have? You might try posting the quest of your wheels with the Brembos in the forum, or ask a place like American Muscle or CJs Pony Parts...
 

Rippednchipper

New Member
Joined
Feb 3, 2019
Messages
4
Location
Ohio
I have 20x9.5 str607s on the car currently. I also have a set of 20x9 velgens vmb5 in the garage. I'm not opposed to running a small spacer if need be but would rather not. I figure if I run a spacer I'll just ball out and run the 6pot brembos.
 

MOTORCITYBADBOY

Member
Established Member
Joined
Sep 23, 2010
Messages
66
Location
Forest, VA
I didn't get out to the shed today to check the measurement on the calipers since it was rainy and muddy outside. I would bet that those STR 607s would probably work fine. You need to just do the homework to find out what backspacing is required for the Brembos. Let me know if you're going to bail. I have another potential buyer... thanks.
 

68gtscode

Well-Known Member
Established Member
Joined
Apr 4, 2008
Messages
1,672
Location
Cleveland, OH

MOTORCITYBADBOY

Member
Established Member
Joined
Sep 23, 2010
Messages
66
Location
Forest, VA
Hey Rippednchipper,
I need to know what you would like to do.. I have another potential buyer but I wanted to give you your chance. Thanks.
 

Rippednchipper

New Member
Joined
Feb 3, 2019
Messages
4
Location
Ohio
Definitely don't let me hold you up from a sale. I appreciate it but if you have someone ready to buy them, do not hesitate.
 

Users who are viewing this thread



Top