Made 1,016 RWHP Today On The Dyno!

Finally got the car to the Dyno today and made a few pulls.

Order goes 6.5 psi (Gate Pressure) 9.5 psi, 11.2 psi, 14.5 psi and 18 psi.







And the video.

Very nice!

Wow,....beast mode!
@gimmie11s would like to see this.

Jesus Kevin. Still stock internals?

Awesome!

What fuel are you using?

Congrats! Once it starts warming back up I'm looking to shoot for 1,000 myself.

speeddemon2000 said:

What fuel are you using?

Click to expand...

Is that even a question? It's @04sleeper (Kevin)... Lol

speeddemon2000 said:

What fuel are you using?

Click to expand...

I'd bet the farm that it's on E85. He may be the guy that moderates the distillery section

Sweet Jesus Kevin.

03cobra#694 said:

Jesus Kevin. Still stock internals?

Click to expand...

No Brad. I swapped a Gen2 Aluminator in with 2011-2013 Intake Cams and Timing Components. Also built the trans and everything to go along with it.

speeddemon2000 said:

What fuel are you using?

Click to expand...

Liquid Gold of course!

Kiohtee said:

Congrats! Once it starts warming back up I'm looking to shoot for 1,000 myself.

Is that even a question? It's @04sleeper (Kevin)... Lol

Click to expand...

LOL. Exactly. Good luck with your project.

Shadow Grey 03 said:

I'd bet the farm that it's on E85. He may be the guy that moderates the distillery section

Click to expand...

LOL. You would be correct!

STAMPEDE3 said:

Sweet Jesus Kevin.

Click to expand...

Ha Ha. Thanks Barry.

Bad ass!

Can’t wait to get my install finished.

My target is 14 psi.

I have 0 doubts it’ll make over 900 at that boost.

I’m also on e85.... ID1050x’s and a Sai Li return system.

Kevin what injectors?


Sent from my iPhone using svtperformance.com

gimmie11s said:

Bad ass!

Can’t wait to get my install finished.

My target is 14 psi.

I have 0 doubts it’ll make over 900 at that boost.

I’m also on e85.... ID1050x’s and a Sai Li return system.

Kevin what injectors?


Sent from my iPhone using svtperformance.com

Click to expand...

It definitely should. I make 815 on 2nd gen @ 16psi with little timing (like 15 total).

Using an orifice in the oil feeds or no?

gimmie11s said:

Bad ass!

Can’t wait to get my install finished.

My target is 14 psi.

I have 0 doubts it’ll make over 900 at that boost.

I’m also on e85.... ID1050x’s and a Sai Li return system.

Kevin what injectors?


Sent from my iPhone using svtperformance.com

Click to expand...

ID1000's and full Fore Level2 with (2) 465 pumps. That's why I stopped at 19 psi.

I made 888/785 on 14.5 psi

BigPoppa said:

Using an orifice in the oil feeds or no?

Click to expand...

Yes. .032 jet I believe. These are the old Turbonetics JB turbos off the SEMA car in 2012 BTW.

Sweet baby Jesus!

I'm jealous! Its gonna take 22-23psi out of my supercharger to make those numbers.

Stock heads and cams? What valvesprings? I'm assuming the it's the 11:1 aluminator making that much power on 19psi. I hope to be joining the 4 digit club with you once my car is back on the road.

That's awesome!

Ballin!

Nice! Who tuned your car?..... Lol


Sent from my iPhone using Tapatalk

SVTdreamin04 said:

Nice! Who tuned your car?..... Lol


Sent from my iPhone using Tapatalk

Click to expand...

Bama tuning canned tune for safety