Double Din Conversion help

I have been working on doing the 01-04 double din radio bezel conversion on my 96.

For those that have done it. Are there any tips, templates, measurements anyone can point me to for making the bracket to hold:

- the radio
- make mounting points for the lower part of the bezel and mounting it to the car?


any help would be appreciated!

It's been a few years since I converted to double-din in my 98.
But here's some reference pics.

Thanks! did you create any lower mounts for the bezel?

WhtSuperStang said:

Thanks! did you create any lower mounts for the bezel?

Click to expand...

I did mine a bit different. Here's a link with the write-up and pics.

https://www.svtperformance.com/thre...uble-din-radio-in-sn95.1149457/#post-15730653

I also have a double DIN bezel in the classifieds, already dyed to match our 94-98 black trim.

Thanks! I have mine dyed and in the car, just didnt know the best way to mount the radio and secure the bottom. Ill take a look at the write up now!

I just got a really good single DIN and installed a hard mount to hold my phone lol. I just do everything on the phone and I can be leaning all the way back in the seat and still be able to touch the phone just fine. If you have a Mach system make sure you hook it up via the RCA ports.