Crank but won't start

rbpf3379

MUSTANG KING
Established Member
Joined
Apr 23, 2013
Messages
93
Location
BAHAMAS
Hey guy I know I haven't been here for a while I'm having a issue with my 2002 Ford mustang gt. I've installed a tork tech kit in on her after the installation started up and ran fine. I then build the bottom end forged internals worked perfect then I decided to throw in a set comp cams and there was the beast I was looking for all my life. Now i spun a bearing due to my negligence pulled her down got the crank resurface and polish put her back together she start ran and then boom she shut off and wont start so I checked for the basics spark fuel. I'm getting spark but no fuel also I have just changed wire harness cause the old on was chipped up for changing over the clips for the injectors. So now I'm check the basic fuse with a test light all works fine I then moved to the ccrm I put my test light on the red wire which is the constant hot pin 24 I then check pin 5 green and yellow wire lead out to the fuel pump I have a power source there I also took out the ccrm tested it in a buddy's car started up fine I reinstalled it back into my still nothing I then went to the back of the car where i checked the inertia switch the red button was down i tapped it and then it popped up so then I pushed it back down and decided to check the power source there and I found that I'm not getting a power source. Is there another fuse box or connection I may have missed

Sent from my SM-G935F using the svtperformance.com mobile app
 

rbpf3379

MUSTANG KING
Established Member
Joined
Apr 23, 2013
Messages
93
Location
BAHAMAS
Hey guy I know I haven't been here for a while I'm having a issue with my 2002 Ford mustang gt. I've installed a tork tech kit in on her after the installation started up and ran fine. I then build the bottom end forged internals worked perfect then I decided to throw in a set comp cams and there was the beast I was looking for all my life. Now i spun a bearing due to my negligence pulled her down got the crank resurface and polish put her back together she start ran and then boom she shut off and wont start so I checked for the basics spark fuel. I'm getting spark but no fuel also I have just changed wire harness cause the old on was chipped up for changing over the clips for the injectors. So now I'm check the basic fuse with a test light all works fine I then moved to the ccrm I put my test light on the red wire which is the constant hot pin 24 I then check pin 5 green and yellow wire lead out to the fuel pump I have a power source there I also took out the ccrm tested it in a buddy's car started up fine I reinstalled it back into my still nothing I then went to the back of the car where i checked the inertia switch the red button was down i tapped it and then it popped up so then I pushed it back down and decided to check the power source there and I found that I'm not getting a power source. Is there another fuse box or connection I may have missed

Sent from my SM-G935F using the svtperformance.com mobile app
Ps none of the other wire harnesses that runs through the car to the back under the seat was tampered with every harness in the car was not touch still in factory condition even up to the computer

Sent from my SM-G935F using the svtperformance.com mobile app
 

Revvv

Infinity Poster
Established Member
Joined
Dec 8, 2017
Messages
10,189
Location
GA

rbpf3379

MUSTANG KING
Established Member
Joined
Apr 23, 2013
Messages
93
Location
BAHAMAS

rbpf3379

MUSTANG KING
Established Member
Joined
Apr 23, 2013
Messages
93
Location
BAHAMAS
You may have a short to chase down.

Sent from my [trashcan S5] using the svtperformance.com mobile app
Good morning thanks guys I found the problem apparently further up behind the rear quarter panel inside the back trunk I saw a relay look like the previous owner was trying make up something in the back there and the wire was cut but didnt join it back properly I started chasing the wire back up with a test multimeter and I found where it was disrupted thanks again.

Sent from my SM-G935F using the svtperformance.com mobile app
 
Last edited:

Users who are viewing this thread



Top