Combos and Dyno numbers - google doc spreadsheet

02gt87

Active Member
Established Member
Joined
Dec 12, 2008
Messages
955
Location
Bakersfield, Ca
Need to update my numbers and a couple of mods, Im the only 2.4 that has reported

Supercharger: Kenne Bell 2.4
RWHP: 638
RWTQ: 578
PSI: 18
Timing: 20
fuel: 91+torco
upper size: 3.00
lower size: stock
RAI: C&L/ K&N fipk hybrid
MAF: SCT BA3000
TB: Billetflow SBTB
Injectors:80lb FRPP
Fuel System: Stock with Kenne Bell BAP
Cooling:LFP heat exchanger/Killer Chiller
Header: Pacesetter Long Tubes
mid-pipe: Pacesetter X-pipe
cat-back:Borla Stingers 2.5"
transmission:stock t56
cams:stock
head porting:stock
shortblock/compression:stock
dyno type: Dynojet
SAE or STD: SAE
tuner: GTR Hipo remote tune by Kurgan

Sent from my LG-US996 using Tapatalk
 

MalcolmV8

Well-Known Member
Established Member
Joined
Mar 27, 2003
Messages
7,353
Location
Tampa, FL
Need to update my numbers and a couple of mods, Im the only 2.4 that has reported

Supercharger: Kenne Bell 2.4
RWHP: 638
RWTQ: 578
PSI: 18
Timing: 20
fuel: 91+torco
upper size: 3.00
lower size: stock
RAI: C&L/ K&N fipk hybrid
MAF: SCT BA3000
TB: Billetflow SBTB
Injectors:80lb FRPP
Fuel System: Stock with Kenne Bell BAP
Cooling:LFP heat exchanger/Killer Chiller
Header: Pacesetter Long Tubes
mid-pipe: Pacesetter X-pipe
cat-back:Borla Stingers 2.5"
transmission:stock t56
cams:stock
head porting:stock
shortblock/compression:stock
dyno type: Dynojet
SAE or STD: SAE
tuner: GTR Hipo remote tune by Kurgan

Sent from my LG-US996 using Tapatalk

OK I got a second entry in there for you.
 

03' White Snake

Well-Known Member
Established Member
Joined
Feb 5, 2007
Messages
3,790
Location
Mass
Here's my new build...

Supercharger: KB 2.8H
RWHP: 785
RWTQ: 701
PSI: 22
Timing: 18.5
fuel: E85
upper size: 3.75"
lower size: 4 lb
CAI: gen 1 style JLT RAI custom made
MAF: BA3000
TB: ACCUFAB SBTB
Header: Bassani Mid Lengths
mid-pipe: Bassani OR-X
cat-back: Bassani
transmission: T-56 Magnum
cams: Custom grinds, Bullet Racing, PAC springs.
head porting: None. Upgraded exhaust valves. 12 Thread upgraded.
shortblock/compression: Stock block decked, 0.020 over, -5.22 custom Diamond Pistons, reliefs, hardcoat anodized with moly skirts, Cometic gaskets, , ~10.3 CR. New Kellogg crank, stock rods, all ARP 2000 hardware, calico coated bearings, boundary oil pump gears.
dyno type: Dyno Jet
SAE or STD: SAE
tuner: PERFORMANCE DYNO, in NH

1/4 Mile ET: 11.3 on old setup
1/4 Mile MPH: 128 on old setup

New dyno sheet.

20180830_212809_zpsjquisbfg_edit_1537883295311_zps436lqzog.jpg


New curve and previous curve. Shows improvements from Cams and bump in compression. Everything else is the same.

20180830_212830_zps9eklfjks.jpg



20180904_154957_zpsrx1s003k.jpg


20180916_115146_zpssekyn8s7.jpg


20180916_115151_zpswtii1oiy.jpg


20180916_115158_zpsxkit8xtv.jpg


Additional Optional info to show power under curve, pull data points at 3500, 4000,4500,5000,5500,6000,6500 RPM and average them
Avg RWHP 3500-6500RPM(500 rpm increments)
Avg RWTQ 3500-6500RPM(500 rpm increments)
 
Last edited:

GodStang

Well-Known Member
Established Member
Joined
Aug 20, 2003
Messages
14,719
Location
Aiken, SC
Wow really nice! Great numbers through the stock inlet. Beautiful build!

Here's my new build...

Supercharger: KB 2.8H
RWHP: 785
RWTQ: 701
PSI: 22
Timing: 18.5
fuel: E85
upper size: 3.75"
lower size: 4 lb
CAI: gen 1 style JLT RAI custom made
MAF: BA3000
TB: ACCUFAB SBTB
Header: Bassani Mid Lengths
mid-pipe: Bassani OR-X
cat-back: Bassani
transmission: T-56 Magnum
cams: Custom grinds, Bullet Racing, PAC springs.
head porting: None. Upgraded exhaust valves. 12 Thread upgraded.
shortblock/compression: Stock block decked, 0.020 over, -5.22 custom Diamond Pistons, reliefs, hardcoat anodized with moly skirts, Cometic gaskets, , ~10.3 CR. New Kellogg crank, stock rods, all ARP 2000 hardware, calico coated bearings, boundary oil pump gears.
dyno type: Dyno Jet
SAE or STD: SAE
tuner: PERFORMANCE DYNO, in NH

1/4 Mile ET: 11.3 on old setup
1/4 Mile MPH: 128 on old setup

New dyno sheet.

View attachment 1517834

New curve and previous curve. Shows improvements from Cams and bump in compression. Everything else is the same.

View attachment 1517835


View attachment 1517836

View attachment 1517837

View attachment 1517838

View attachment 1517839

Additional Optional info to show power under curve, pull data points at 3500, 4000,4500,5000,5500,6000,6500 RPM and average them
Avg RWHP 3500-6500RPM(500 rpm increments)
Avg RWTQ 3500-6500RPM(500 rpm increments)
 

c6zhombre

E85 NutSwinger
Established Member
Joined
Sep 14, 2008
Messages
5,430
Location
League City, TX
Here's my new build...

Supercharger: KB 2.8H
RWHP: 785
RWTQ: 701
PSI: 22
Timing: 18.5
fuel: E85
upper size: 3.75"
lower size: 4 lb
CAI: gen 1 style JLT RAI custom made
MAF: BA3000
TB: ACCUFAB SBTB
Header: Bassani Mid Lengths
mid-pipe: Bassani OR-X
cat-back: Bassani
transmission: T-56 Magnum
cams: Custom grinds, Bullet Racing, PAC springs.
head porting: None. Upgraded exhaust valves. 12 Thread upgraded.
shortblock/compression: Stock block decked, 0.020 over, -5.22 custom Diamond Pistons, reliefs, hardcoat anodized with moly skirts, Cometic gaskets, , ~10.3 CR. New Kellogg crank, stock rods, all ARP 2000 hardware, calico coated bearings, boundary oil pump gears.
dyno type: Dyno Jet
SAE or STD: SAE
tuner: PERFORMANCE DYNO, in NH

1/4 Mile ET: 11.3 on old setup
1/4 Mile MPH: 128 on old setup

New dyno sheet.

View attachment 1517834

New curve and previous curve. Shows improvements from Cams and bump in compression. Everything else is the same.

View attachment 1517835


View attachment 1517836

View attachment 1517837

View attachment 1517838

View attachment 1517839

Additional Optional info to show power under curve, pull data points at 3500, 4000,4500,5000,5500,6000,6500 RPM and average them
Avg RWHP 3500-6500RPM(500 rpm increments)
Avg RWTQ 3500-6500RPM(500 rpm increments)


Nice, was wondering how it came out. Big increases all across the board! Well done
 

03' White Snake

Well-Known Member
Established Member
Joined
Feb 5, 2007
Messages
3,790
Location
Mass
Nice, was wondering how it came out. Big increases all across the board! Well done

Thanks man. I need bigger injectors to add a little more boost. I'm still only running 80's. They are between 92-95%. It was 95 degrees and very humid on that dyno day. So it should be close to breaking 800 on a cool day.
 

94 Cobra R

Same Ol Same Ol
Established Member
Joined
Sep 22, 2002
Messages
1,119
Location
Gainesville, FL
Ok, here’s mine:

2003 DSG
Stock longblock
JLT Ram Air
60# Injectors
3000 Mass Air
Accufab TB
KB 2.2 Gen 1 @ 18lbs
Ford Performance Headers
Bassani Exhaust w/hi-flo cats
Killer Chiller with no HE
Stock fuel system with Fore Hat (GT pumps)

Was definitely hot (94 degrees and 85% humidity) and we tuned it down after the 606 rwhp. (To 595) just to give some leeway with gas, etc.

Car has a ton of mods, mostly suspension and handles like a Miata.

Hopefully that’s enough info!


3a3e9d9bcb630d8091bc43b9c5d9934c.jpg




Sent from my iPad using Tapatalk
 

termibryqn

Member
Established Member
Joined
Jul 19, 2018
Messages
147
Location
Louisville ky
Supercharger: 2.3 vmp tvs

RWHP: 685

RWTQ: 619

PSI: 19

Timing: 17

fuel: e85

upper size: 2.8

lower size: 2# lower

CAI: JLT ram air

MAF: stock/mafia

TB: LFP Large mouth

Header: MAC ceramic long tubes

Mid: Mac prochamber

cat-back: Mac 2.5”

transmission: stock

cams: stock

head porting: livernoise stg 3

shortblock/compression: stock

Tuner: Lee Blankenship



Sent from my iPhone using svtperformance.com
 

termibryqn

Member
Established Member
Joined
Jul 19, 2018
Messages
147
Location
Louisville ky
Supercharger: 2.3 vmp tvs

RWHP: 685

RWTQ: 619

PSI: 19

Timing: 17

fuel: e85

upper size: 2.8

lower size: 2# lower

CAI: JLT ram air

MAF: stock/mafia

TB: LFP Large mouth

Header: MAC ceramic long tubes

Mid: Mac prochamber

cat-back: Mac 2.5”

transmission: stock

cams: stock

head porting: livernoise stg 3

shortblock/compression: stock

Tuner: Lee Blankenship



Sent from my iPhone using svtperformance.com

***** Mustang Dyno *****


Sent from my iPhone using the svtperformance.com mobile app
 

b00sted4v

Member
Established Member
Joined
Sep 2, 2008
Messages
659
Location
Boston,MA
Supercharger: 3.4 Whipple
RWHP: 814
RWTQ: 783
PSI: 24
Timing:
fuel: X85
upper size: 3.5
lower size: Stock
CAI: JLT
MAF: BA3000
TB: Accufab
Header: American Racing
mid-pipe: American Racing
cat-back: Borla Stinger
transmission: t56
cams: Comp Stage 3 Blower
head porting: NO
shortblock/compression: STOCK
dyno type: Dyno Jet
SAE or STD: SAE
tuner: Performance Dyno
 

2003RedfireVert

Male and Female He created them.
Established Member
Joined
Jan 25, 2022
Messages
2,375
Location
Fly over country
Here goes nothing…doubt anyone with access to this sheet is even on here anymore.

Supercharger: KB 2.8
RWHP: 668
RWTQ: 561
PSI: 18
Timing: 21
fuel: E85
upper size: 3.5
lower size: stock
CAI: JLT
MAF: SCT BA3000
TB: Accufab
Header: BBK Ceramic LT 1 5/8
mid-pipe: BBK
cat-back: Borla
transmission: Stock T56
cams: Stock
head porting: Stock
shortblock/compression: Stock
dyno type: Dyno Jet
SAE or STD: STD
tuner: Matt at Mustang Muscle (binary editor)
 
Last edited:

PC03GT

Well-Known Member
Established Member
Joined
Sep 8, 2010
Messages
2,391
Location
delaware
Supercharger: 2.3 gen3 Whipple
RWHP: 654
RWTQ: 600
PSI: 18
Timing: 18
Fuel: 93
Upper: 3.0
Lower: stock
CAI: JLT Highboost
MAF: SCT BA3000
TB: Accufab SB
Header: kooks longtube 1 3/4
Mid pipe: FFE kooks 3" x pipe
Catback: Borla stingers
Transmission: stock with 26 spline input shaft
Motor: stock, stock cams, compression and heads
Dyno: dynojet SAE
Tuner: Performance Evolution in DE
20221222_171722.jpg
 
Last edited:

JetmechF16

Under Pressure
Established Member
Premium Member
Top Shelf Gentlemen
Joined
Sep 14, 2006
Messages
3,980
Location
Huffman, TX
This thread originally came out when I was between builds so I guess better late than never haha. This is based off the only dyno graph I can find at the moment, here's the info in case anybody wants to add centri data to the spreadsheet;

Supercharger: Procharger F-1A-94
RWHP: 771
RWTQ: 630
PSI: 25
Timing: 20 degrees max
Fuel: e85
Upper size: 3.6"
Lower size: 7.65"
CAI: Turbo-Guard screen haha
MAF: HPX-E
TB: LFP Big Mouth
Header: JBA 1 5/8 mid-length
Mid-pipe: JBA 3" H-pipe
Cat-back: JBA 3"
Transmission: RPM-built T56
Cams: Stock
Head porting: Stock
Shortblock/compression: 5.3 Boss block stroker 9.8:1 cr
Dyno type: DynoJet
SAE or STD: STD
Tuner: Chris at HRD

1/4 Mile ET - N/A
1/4 Mile MPH - N/A

Additional Optional info to show power under curve, pull data points at 3500, 4000,4500,5000,5500,6000,6500 RPM and average them
Avg RWHP 3500-6500RPM(500 rpm increments) = 555
Avg RWTQ 3500-6500RPM(500 rpm increments) = 575


HRD dyno tune graph - 11Apr22.jpg
 

TerminatorCobraJP

Well-Known Member
Established Member
Joined
Aug 5, 2020
Messages
382
Location
MO
Supercharger: 2.3 gen3 Whipple
RWHP: 654
RWTQ: 600
PSI: 18
Timing: 18
Fuel: 93
Upper: 3.0
Lower: stock
CAI: JLT Highboost
MAF: SCT BA3000
TB: Accufab SB
Header: kooks longtube 1 3/4
Mid pipe: FFE kooks 3" x pipe
Catback: Borla stingers
Transmission: stock with 26 spline input shaft
Motor: stock, stock cams, compression and heads
Dyno: dynojet SAE
Tuner: Performance Evolution in DEView attachment 1807230
So a 2.3 Whipple on 93 can make 600+ WHP without getting into building the engine? This sounds exactly like what I want to do for mods and make for power with my car.

Sent from my SM-S536DL using the svtperformance.com mobile app
 

PC03GT

Well-Known Member
Established Member
Joined
Sep 8, 2010
Messages
2,391
Location
delaware
So a 2.3 Whipple on 93 can make 600+ WHP without getting into building the engine? This sounds exactly like what I want to do for mods and make for power with my car.

Sent from my SM-S536DL using the svtperformance.com mobile app
Yes sir, I have the VMP intercooler brick, reisch thermostat and AFCO HE with fans, I believe that helped out a bit
 

MG0h3

Well-Known Member
Established Member
Joined
Jul 23, 2014
Messages
13,683
Location
El Paso, TX

TerminatorCobraJP

Well-Known Member
Established Member
Joined
Aug 5, 2020
Messages
382
Location
MO
Yes. All day everyday without breaking a sweat.

Blower
Injectors
BAP
Maf or extender

That’s the cheapest way to do it.


Sent from my iPhone using the svtperformance.com mobile app
Thanks, I was considering making a post asking more about it. I've been trying to figure out what the most cost effective way to get to 650WHP would be. What size injectors would you need? Would I need bigger fuel pumps or would the stock pumps with a BAP be enough?

Sent from my SM-S536DL using the svtperformance.com mobile app
 

Users who are viewing this thread



Top