Where is Wolverine? Turbo sn95

Screw-Rice

I like BBC
Established Member
Joined
Jun 12, 2005
Messages
7,947
Location
Denver, Co (Hell)
Before @Screw-Rice calls you out for a race, I don't mind sitting in the pilot seat from time to time. I'm pretty sure I can get a car to Valdosta and meet you in the middle.

So are you running 9s in the 1/8 or the 1/4? Do you want to prove it?

I am even willing to bet a few of the boys here would come out a snag a bit of video.

Actually, you stated a time. There is no reason for me to bring out a grudge car that I already know would win.

Name the track and run a timed pass. Back it up. I want to see what appears to be a lightly modded Mach 1 run a 9 sec 1/4.

I'm calling BS. So I stand with Brad. Prove it.

Sent from a non multiquoting device at svtperformance.com mobile app
I think he means it only takes 9 seconds to hit a deer.
 

Revvv

Infinity Poster
Established Member
Joined
Dec 8, 2017
Messages
10,189
Location
GA
Negative ghost rider the factory axles hold up great.

I have 2 other friends running same setup as me after we used my car as the test dummy to figure out what worked and what didn’t.

If you actually knew anything about Nissans that rear end combo is as stout at the Supra’s IRS
I'm a Z and Supra fan. I have seen several 280s on the strip. It can run 8s with a braced SRA on a custom fabbed 4 link with a panhard bar and a set of training wheels hanging off the back. The axles also need to be cut and fabbed so the car can tuck enough rubber out back to find traction.

That needs to be attached to a full tube chassis. The shocks or coil overs need to be dialed in perfectly also. Otherwise you have a wheelie machine, or a smoke show.

Don't forget the one off front end needed to give the driver a chance of controlling the car as the chassis flexes and twists.

My 02 GT Convertible runs a 5sec 1/4 at svtperformance.com mobile app I just can't prove it.
 

Revvv

Infinity Poster
Established Member
Joined
Dec 8, 2017
Messages
10,189
Location
GA
I didn't ask for an instacrap page. I asked for a link to a video that gives unquestionable facts. I'm not digging for you.

My 02 GT Convertible runs a 5sec 1/4 at svtperformance.com mobile app I just can't prove it.
 

Grant Theft Auto

I hit deer.
Established Member
Joined
Sep 11, 2009
Messages
3,445
Location
Florida
I'm a Z and Supra fan. I have seen several 280s on the strip. It can run 8s with a braced SRA on a custom fabbed 4 link with a panhard bar and a set of training wheels hanging off the back. The axles also need to be cut and fabbed so the car can tuck enough rubber out back to find traction.

That needs to be attached to a full tube chassis. The shocks or coil overs need to be dialed in perfectly also. Otherwise you have a wheelie machine, or a smoke show.

Don't forget the one off front end needed to give the driver a chance of controlling the car as the chassis flexes and twists.

My 02 GT Convertible runs a 5sec 1/4 at svtperformance.com mobile app I just can't prove it.
Are you a moron or what guy?

 

gimmie11s

I Race Pontiacs
Established Member
Premium Member
Joined
Jun 1, 2004
Messages
18,491
Location
la la land
Negative ghost rider the factory axles hold up great.

I have 2 other friends running same setup as me after we used my car as the test dummy to figure out what worked and what didn’t.

If you actually knew anything about Nissans that rear end combo is as stout at the Supra’s IRS




I had a 1970 510 that would break axles (and 3rd members) from the overwhelming power of the L20b I swapped in (100 hp on a good day)

Just bad luck?




Sent from my iPhone using the svtperformance.com mobile app
 

Grant Theft Auto

I hit deer.
Established Member
Joined
Sep 11, 2009
Messages
3,445
Location
Florida
I didn't see a time, nor proof that this junk of rust belongs to you.

Who's the moron?

Bring it to the track. Back your mouth up.

My 02 GT Convertible runs a 5sec 1/4 at svtperformance.com mobile app I just can't prove it.
Head on over to my Instagram page then I’m not linking my Facebook... I don’t use YouTube much.

Better yet join the SloppyMechanics Facebook page. My car is stupid popular on there. Original owner was Felix Hamilton. Car held the 280z 1/4 record for awhile until Dustin with the black 280 reclaimed it. Think he went 8.20’s @ 170
 

Revvv

Infinity Poster
Established Member
Joined
Dec 8, 2017
Messages
10,189
Location
GA
Head on over to my Instagram page then I’m not linking my Facebook... I don’t use YouTube much.

Better yet join the SloppyMechanics Facebook page. My car is stupid popular on there. Original owner was Felix Hamilton. Car held the 280z 1/4 record for awhile until Dustin with the black 280 reclaimed it. Think he went 8.20’s @ 170
So it isn't the world's fastest? I already knew that.

I don't mess with Facebook or Instagram.

Enjoy your night. I have to be up in a few hours.

My 02 GT Convertible runs a 5sec 1/4 at svtperformance.com mobile app I just can't prove it.
 

2KBlackGT

The Man, Myth, The Legend
Established Member
Joined
Jan 7, 2005
Messages
9,636
Location
Arkansas
Are you a moron or what guy?

He's not a moron but he's acting very unchristian like lol. This is stupid. You've seemed to have done well for yourself(even if it was an inheritance) after all your troubles of the past, good for you and nice fleet of cars you have now.
 

DSG2003Mach1

Well-Known Member
Established Member
Premium Member
Joined
Apr 15, 2004
Messages
15,913
Location
Central Fl
Before @Screw-Rice I want to see what appears to be a lightly modded Mach 1 run a 9 sec 1/4.


Sent from a non multiquoting device at svtperformance.com mobile app

Get it together man, the Mach is mine and apparently appearances are deceiving. Don’t get me wrong, not claiming a 9 second car, not my goal/concern at this point in time
 

Grant Theft Auto

I hit deer.
Established Member
Joined
Sep 11, 2009
Messages
3,445
Location
Florida
He's not a moron but he's acting very unchristian like lol. This is stupid. You've seemed to have done well for yourself(even if it was an inheritance) after all your troubles of the past, good for you and nice fleet of cars you have now.
Thanks lol

My favorite is my black ‘01 lightning. Truck has a lot of goodies on it. First vehicle I’ve ever got completely stock and changed every single piece of it.

Just wish I could get these Cog Drives to line up better, truck chews through belts. Only thing I haven’t tried yet is shimming the pulley bridge itself so I think that might be the issue.
 

DSG2003Mach1

Well-Known Member
Established Member
Premium Member
Joined
Apr 15, 2004
Messages
15,913
Location
Central Fl
Thanks lol

My favorite is my black ‘01 lightning. Truck has a lot of goodies on it. First vehicle I’ve ever got completely stock and changed every single piece of it.

Just wish I could get these Cog Drives to line up better, truck chews through belts. Only thing I haven’t tried yet is shimming the pulley bridge itself so I think that might be the issue.

ever figure out wtf was going on with it spitting head gaskets left and right?
 

Revvv

Infinity Poster
Established Member
Joined
Dec 8, 2017
Messages
10,189
Location
GA
He's not a moron but he's acting very unchristian like lol. This is stupid. You've seemed to have done well for yourself(even if it was an inheritance) after all your troubles of the past, good for you and nice fleet of cars you have now.
I like to race. I enjoy grudge racing. Often times the heckling and banter are more interesting than the race. I don't have to be nice all of the time. I don't care if you judge me.

Several have asked this guy to back up his times. ...and we are still waiting.

sent from a non multiquoting device at svtperformance.com mobile app
 

Revvv

Infinity Poster
Established Member
Joined
Dec 8, 2017
Messages
10,189
Location
GA
Get it together man, the Mach is mine and apparently appearances are deceiving. Don’t get me wrong, not claiming a 9 second car, not my goal/concern at this point in time
Yeah, I noticed the screw up later in the evening. I made a mistake while having a little fun at the expense of Grant. I fell on my face with that one.

I can't win them all.

sent from a non multiquoting device at svtperformance.com mobile app
 

Grant Theft Auto

I hit deer.
Established Member
Joined
Sep 11, 2009
Messages
3,445
Location
Florida
ever figure out wtf was going on with it spitting head gaskets left and right?

First go around was stock head bolts and guess they didn’t like the Shelby blower swap

2nd time around mastiff (shop doing the work) installed the ARP head studs I ordered and torqued them to fords spec’s and not ARP’s so they popped again almost immediately on the dyno.

Mastiff payed out of pocket for that ****up I had them pull the entire motor out and had Jordan Martin at MHS do the heads and re-assemble the motor. Pistons got new rings and the heads got a stage 2.5 port job with stage 2 blower cams

Truck runs great now but has the belt issue
 

Users who are viewing this thread



Top