2.93 upper 4lb lower...

Dib14gt

Member
Established Member
Joined
Apr 6, 2016
Messages
55
Location
Lancaster Pa
stock Eaton. Aftermarket blower isnt in the budget right now. Those of you running this set up what else needs to be added? Do stock injectors handle this safely? Upgrade my MAF? Thanx in advance.
 

03' White Snake

Well-Known Member
Established Member
Joined
Feb 5, 2007
Messages
3,792
Location
Mass
Definites: BA3000 maf, TR6 plugs gapped 0.030", full set of idlers.

Injectors are fine, some cars need a BAP and some don't. Need to get it on a dyno to tell. Most are good without the BAP.

You will love that setup, I ran it for a few years.
 

01yellercobra

AKA slo984now
Established Member
Joined
Oct 5, 2005
Messages
21,128
Location
Cali
If the eaton is stock skip the lower. Consensus is it'll overspin the blower and won't do you any good. If you're ported then yes, that's a good combo.

I'm running the stock eaton with a 2.8" upper. My stock MAF was close so I upgraded it just to be safe. I'm still running stock injectors though.
 

apex svt

MEAN STREAK
Established Member
Joined
Jun 29, 2012
Messages
2,162
Location
USA
^^ what he said. I’d change to a ba3000 maf as well, don’t mess with a mafia. Pretty high failure rate says multiple tuners.
 

kezell

MW3-kezell17
Established Member
Joined
Mar 5, 2004
Messages
3,773
Location
St.Amant, LA
My setup was 2.76/4lb on a home port and posi ported TB and plenum. I upgraded to a BA2400, 60lbs, BAP. I didn't need all of it but I wanted to be safe. I am also running LT, O/R X, etc.

I have since removed the lower, and unplugged the BAP.
 

Users who are viewing this thread



Top