15" CCW?

ITSTOCK

Well-Known Member
Established Member
Joined
Sep 9, 2004
Messages
1,782
Location
wv
Before I reach out to CCW on if they even make them, does anyone have pictures of what a 15" CCW looks like on the back (if they exist)? I have the 16" but the tire selection is limited, and I think I am going to move to a set of wheels that I can get a 15 in the back.
 

Used Oil

Well-Known Member
Established Member
Joined
Sep 16, 2011
Messages
347
Location
Texas
I have a 15" CCW Classic. You can only get it in a 2 piece of course. I haven't seen any except for mine.
 
Last edited:

Used Oil

Well-Known Member
Established Member
Joined
Sep 16, 2011
Messages
347
Location
Texas
IMG_4427.JPG
 

ITSTOCK

Well-Known Member
Established Member
Joined
Sep 9, 2004
Messages
1,782
Location
wv
Yep, that's awesome. I'm doing it so long as CCW will still do the 15's (the 2 piece is no longer listed on their website). If you get a picture on the car, please post it.
 

ITSTOCK

Well-Known Member
Established Member
Joined
Sep 9, 2004
Messages
1,782
Location
wv
What backspacing did you go with? I'm assuming SRA? It's tough to tell with the tire vs wheel size, but I'd like mine to be tucked in more.
 

ITSTOCK

Well-Known Member
Established Member
Joined
Sep 9, 2004
Messages
1,782
Location
wv
What brakes? CCW is saying that they don't think they will clear the stock GT brakes/cobra calipers that I have, and I should really take a close measurement before considering. At this point, I might just get my current 16's beadlocked and run a 28x10x16 slick.
 

Soap

Well-Known Member
Established Member
Joined
Aug 16, 2001
Messages
1,314
Location
In the garage
CCW is saying that they don't think they will clear the stock GT brakes/cobra calipers that I have, and I should really take a close measurement before considering.

All the calipers are the same (V6/GT/Mach/Cobra). Only difference is that Mach/Cobra have larger diameter vented rotors with thinner pads while Base/GT have smaller diameter nonvented rotors with thicker pads.

--Joe
 

Used Oil

Well-Known Member
Established Member
Joined
Sep 16, 2011
Messages
347
Location
Texas
What brakes? CCW is saying that they don't think they will clear the stock GT brakes/cobra calipers that I have, and I should really take a close measurement before considering. At this point, I might just get my current 16's beadlocked and run a 28x10x16 slick.
I use GT brake rotors on the rear to clear the wheel.
 

Used Oil

Well-Known Member
Established Member
Joined
Sep 16, 2011
Messages
347
Location
Texas
wow thats ****ing HOT! Backspacing a little off but but I'm assuming thats the closest u can get nonetheless it looks wicked!
I wanted a little less backspacing to see how they fit. I haven't seen this size used before. This rear end is getting narrowed later when other changes are done.
 

Users who are viewing this thread



Top