Intercooled Vortech Complete Kit

hiddenhiss

New Member
Established Member
Joined
May 5, 2015
Messages
23
Location
Santa Barbara, CA
Hey guys, I bought this supercharger a couple years ago on this forum. I spent A LOT of time custom fabricating all the piping to be extremely efficient but, life happened and now I need to sell my car, I decided to sell this kit separately. I have less than 25 miles on it but witnessed no issues! To install this kit onto a 96-98 cobra would take minimal fabrication, I believe just drilling mounts for the FMIC and cutting a hole for the "cold side". Feel free to reply to the post, PM me, or contact me using the business card pictured! I'm asking $3200 shipped and paypal'd for the following
Vortech V-1 S trim w/ 2 pulleys
Treadstone TR1035
Tial 50 BOV (supercharger spring)
Aeromotive Fuel Pressure Regulator
Lucas 42.5lb injectors (just flow matched by RC engineering)
Custom fabricated piping
Lightning 90mm Maf with weld in bung
TREX in-line fuel pump
Diablosport MAFIA
Vortech Air Filter
AND everything in my possession that came from the original kit (I believe it to be complete, every bolt from the instructions is there)
IMG_3527-min.JPG
IMG_3526-min.JPG

FullSizeRender (7)-min.jpg
FullSizeRender (8)-min.jpg
IMG_2959-min.JPG
IMG_3204-min.JPG
IMG_3091-min.JPG
IMG_3528-min.JPG


ALSO, for anyone in CA such as myself. This kit WILL "pass smog". meaning that the blower has a CARB OE stamp and the FMIC is well hidden.
 
Last edited:

ZeroDCX

Active Member
Established Member
Joined
Sep 3, 2009
Messages
848
Location
VA
Brackets are the same, however the intake elbow coming off of the throttle body is different. In relation to the engine, 96-98' Cobra intakes are angled while the 99+ is straight.

96-98 Cobra/Mark VIII
V4FK112-028.jpg


99+ Cobra/Mach 1/etc
V4FR112-028.jpg
 

racebronco2

Well-Known Member
Established Member
Joined
Sep 23, 2003
Messages
7,268
Location
palmdale, ca
My understanding is that the brackets would be the same, I believe the piping would work so long as a 01 still has a twin blade throttle body. I can't make any guarantee though.

The mounting bracket is not the same. The 96-98 Cobras have a 3 bolt timing cover and the 01 Cobra's have a 1 bolt timing cover. I think the 01's also need another idler pulley too.
 

Users who are viewing this thread



Top