Eaton silencer holes

Nervouswreck

Active Member
Established Member
Joined
May 5, 2015
Messages
385
Location
Pennsylvania
I got my blower back from porting and I've always been interested in filling the silencer holes . I've read some threads on here about it and taking everything into consideration I'm gonna do it . Now what I read made some mention about what to use and it was kind of all over the place in that aspect. So that brings me to the question, what should I use ? What do you guys think is best ?

High temp epoxy ?
JB Weld ?
Quick steel ?

Thanks all


Sent from my iPhone using the svtperformance.com mobile app
 

KLLR SNK

Active Member
Established Member
Joined
Oct 15, 2012
Messages
940
Location
Moline, IL
JB Weld "Original" NOT the 5 minute Quick Set. The Quick Set can and has been reported to blow out on more than one occasion. The "Original" should set up for 24 hours.
 

Nervouswreck

Active Member
Established Member
Joined
May 5, 2015
Messages
385
Location
Pennsylvania
JB Weld "Original" NOT the 5 minute Quick Set. The Quick Set can and has been reported to blow out on more than one occasion. The "Original" should set up for 24 hours.

I used original ( 24 hour set time ) , taped the inside of the case , I stuffed a little bubble wrap behind the tape inside the case so the tape pushes slightly up and away from rotors from inside out , then filled holes and then all the area outside the holes


Sent from my iPhone using the svtperformance.com mobile app
 

Users who are viewing this thread



Top