New PB In My 2015 Vortech Centri 9.27 at 147.4

ALLKHEINZ

Well-Known Member
Established Member
Joined
Nov 16, 2009
Messages
1,921
Location
Ontario Canada
hoping to get a 9.0 and if lucky an 8.99 out of it at some point with the smaller pulley....this is with a 20% and 3.33 non carbonite ..DA was 1900 and track prep wasnt the best this day, i managed 2 relatively clean passes which Lund said i was spinning on after he went over the logs i sent him....very happy with the car, shes running great, I will be bolting on the 2.95 carbonite pulley soon to see what shes got....here is the 9.27 pass...

Big Shout out and Thankyou to Terry Beefcake and Brian and his Finishline Performance Team in Milford OH, great guys to deal with!

 

ALLKHEINZ

Well-Known Member
Established Member
Joined
Nov 16, 2009
Messages
1,921
Location
Ontario Canada
no setup changed in the off season...has a built shortblock now with gt350 intake and i finally caved and dropped for dss halfshafts. the stock ones lived and lasted and never broke but i figure they were hanging on for dear life with the 1.33 60' i got out of them.
 

98 Saleen Cobra

Well-Known Member
Established Member
Joined
Feb 28, 2007
Messages
19,522
Man that's still awesome, I also see it's a YSI-b and no longer the JT-trim.. Congrats man!
 

ALLKHEINZ

Well-Known Member
Established Member
Joined
Nov 16, 2009
Messages
1,921
Location
Ontario Canada
^^^ thanks, according to terry and lund i need to spin it harder lol...will be getting to it shortly...id like to atleast beat my all time personal fastest pass which was 9.16 in my 2013 paxton 2200 car....i think this car can do it...i hope lol
 
Last edited:

gimmie11s

I Race Pontiacs
Established Member
Premium Member
Joined
Jun 1, 2004
Messages
18,491
Location
la la land
Heinz you never cease to amaze. Love watching all of your and your crews' videos.

You guys dont eff around!
 

esacteksab

Member
Established Member
Joined
Mar 19, 2015
Messages
91
Location
KS
What was race weight? Built short block mean sleeved? Or just rods & pistons?

Congrats on the pass! Race gas or E-85?
 

ALLKHEINZ

Well-Known Member
Established Member
Joined
Nov 16, 2009
Messages
1,921
Location
Ontario Canada
What was race weight? Built short block mean sleeved? Or just rods & pistons?

Congrats on the pass! Race gas or E-85?
e85. race weight no less then 4200lbs and prolly 4300...i weigh 408lbs(not kidding) sleeved shortblock with all the good stuff.
 

98 Saleen Cobra

Well-Known Member
Established Member
Joined
Feb 28, 2007
Messages
19,522
Wow!!! That's crazy to think my car is about 1k lighter with a JT-trim on 15psi I made 840rwhp.. I need to run my car down the 1/4 lol..
 

esacteksab

Member
Established Member
Joined
Mar 19, 2015
Messages
91
Location
KS
e85. race weight no less then 4200lbs and prolly 4300...i weigh 408lbs(not kidding) sleeved shortblock with all the good stuff.

I'm every bit of 370lb if not more. My race weight is 4240 with the Whipple. Good to see what works. Appreciate the reply.
 

Users who are viewing this thread



Top