What happened to the On3 SINGLE turbo kit for Coyote's?

stang910

Well-Known Member
Established Member
Joined
Mar 25, 2010
Messages
932
Location
NC
I still have the OEM pan. Just curious, but where did you hear On3 is working on the single kit again? Seems like a waste since the twin kit works so well.
 

MRSUPRA

Member
Established Member
Joined
Aug 30, 2010
Messages
485
Location
MD
BTW, I have installed several turbo kits. Fitment was really, for real bad on my drivers side downpipe. Wasn't even close.. Doesn't mean every ON3 kit will fit bad like mine, but that's the inconsistency you'll see with some of these low quality control products that come out of China.

Still worth it IMO.
 

fordman2012

Member
Established Member
Joined
Nov 20, 2015
Messages
102
Location
Milwaukee
I still have the OEM pan. Just curious, but where did you hear On3 is working on the single kit again? Seems like a waste since the twin kit works so well.

I actually saw it on their instagram and they said they hope to have it done as soon as this fall. I think they wanted to make a single kit that they learned from some of the mistakes of the first kit and some of the things that the other companies learned developing theirs. As far as fitment goes I know there were some problems because the original twin kit was designed for a 2011-2012 car and the 2013-14 cars had problems with fitment and needed different bolts, brackets ect. at least from the research that I have done. However that really does not deter me to much as if I need to make changes to the kit I can do that pretty easily with the help of some pretty gifted family members.

on32_zpsi6qqgm6s.png


on31_zpsjhcpjsty.jpg
 

jn2

Member
Established Member
Joined
Feb 11, 2016
Messages
440
Location
Austin, TX
Very nice, I wonder what about the kit causing issue with the front sway bar. Could it be the charge piping?
 

cjd223

Member
Established Member
Joined
Nov 19, 2014
Messages
498
Location
Hoover, AL
There is an old saying that is always true = you get what you pay for. CPR sources their turbo units from a company about 10 miles from where I live. They make a very good turbo.
 

Jinx.

Stig's Lazy Cousin
Established Member
Joined
Mar 16, 2011
Messages
118
Location
Mebane, NC
I'm not knocking on it for not being able to run a sway bar, however that is what keeps me for in awe over it. Now if someone could fabricate sway bar support that would allow this single kit with a sway bar.....where do I order.

This is a hobby. I just can't justify but spending so much on a power adder. So these On3 kits are a perfect price point for a niche car like a mustang in my opinion.

I love the On3 twin setup but the complexity and plumbing (to adjust periodically) looks like a headache ready to happen. Single kits seem more practical.
 

jn2

Member
Established Member
Joined
Feb 11, 2016
Messages
440
Location
Austin, TX
They responded saying it's a track kit and you don't really need a sway bar at the track, if you want to keep the sway bar then get the twin kit...I may have paraphrased a bit, but that's pretty much what they said
 

fordman2012

Member
Established Member
Joined
Nov 20, 2015
Messages
102
Location
Milwaukee
I hear a mixed consensus from most owners. Some say it does not bother them too much with Normal Street driving some say that it is horrible. How much would it really affect the driving on normal daily driving if you’re mindful of your turns?
 

DaBigBone

Well-Known Member
Established Member
Joined
Sep 3, 2009
Messages
3,828
Location
Ohio
No sway bar checking in. I legitimately cannot tell a difference in street driving since removing it.

I'll be keeping a close eye on this kit, especially since they're local to me
 

stang910

Well-Known Member
Established Member
Joined
Mar 25, 2010
Messages
932
Location
NC
If you have aftermarket springs you'll have a hard time knowing if the front sway bar is there or not as long as you aren't autocrossing. I haven't had a front sway bar since my car was new. Now if you remove your rear sway bar also the car will feel terrible.
 

Users who are viewing this thread



Top