2003 SVT Cobra for sale

pschwind

Member
Established Member
Joined
Aug 29, 2008
Messages
101
Location
Slinger, WI
I’ll be looking to sell my 2003 Cobra in the next 2-3 weeks. The only reason I want to part with it is to have cash to finance my next project which will be building a up a Fox Body with my sons. The father/son time spent with the boys is far more important than than the actual car.

Anyway, I’ve had this Cobra just about a year and it’s still in storage. Once I pull it out of storage all it needs is a detail, oil change and the stabilized gas run out out. I bought the car from a good friend and I went with him to buy it in 2013. I am the 4th owner but I know the owner history fairly well.

Overall the car is in very good to excellent condition. The paint shines and there’s not a single dent or ding in the car. There are some nicks/chips in the paint so it’s not flawless by any means. I would consider the interior a 9 out of 10. It gets driven but it’s never been some ragged out Cobra. In fact, it’s Cobra #48 built on the 6th day of ‘Terminator’ production and it’s still under 50k (but the next drive or two will hit 50k). My had the car built to handle and handle it does. The trade off of course is a harsh ride.

I didn’t really do much to it over the last year other than return to it to a stock appearance. Previous owners had a large cowl hood on it, black vinyl stripe over the center and extra SVT emblems. I removed all that when I bought it, gave it a buff and detailed and enjoyed it all summer long.

Lastly, the car has a clean and clear title in my name. I own it and I’m not hard up for cash. Zinc yellow isn’t everyone’s favorite color so I’d prefer you keep color comments to yourself.

2003 SVT Mustang Cobra - 49.9K miles - Build #48 of 8,394.

Engine/Exhaust
  • Stiegemeier Stage V Ported Eaton with 2.76 Upper Only
  • JLT Ram Air Intake
  • Kenne Bell Boost A Pump
  • Diablosport MAFia Mass Air Flow tuner
  • Positive Pressure Relief Valve delete kit
  • Metco 90mm pulley set
  • Gen 3 Killer Chiller with Drag Pack
  • Bassani S.S. Catted X - Borla Cat-Back w/ Stingers
  • SLP exhaust tips
  • 170 Degree T-stat
  • Professionally tuned by Marv @ C&M Performance, Hubertus
  • Dyno Results = 486 RWHP 465 RWTQ (79 degree day, pre Killer Chiller)
Suspension/Braking
  • 14” Brembo Front brake kit
  • 13” Brembo 2-piece disc conversion
  • H&R Race Springs
  • Maximum Motorsports Caster Camber Plates
  • Bilstein HD Shocks and Struts
  • Steeda X2 ball joints
  • Global West front control arms w/Delrin bushings
  • Maximum Motorsports front bumpsteer kit
  • Full Tilt Boogie Racing rear bumpsteer Kit
  • Maximum Motorsports Solid rack bushings
  • Full Tilt Boogie Racing IRS Full Bushing Kit
  • Maximum Motorsports Full Length Sub-Frame Connectors (welded)
Drivetrain
  • MGW short throw shifter
  • AFS 18 x 10.5 wrapped in 305/35/18 Toyo R888's
  • AFS 18 x 9 wrapped in 275/35/18 Michelin Pilot Super Sports
  • Torsen T2R Torque-biasing differential - 3.55 gears
  • Ford Racing Diff Cover – (with drain and fill holes)
Other
  • LED Headlight and Fog lights
  • Jensen VM9725BT In-Dash GPS Navigation System
  • Noah car cover included
  • SCT XCal 3 tuner included

The “less than perfect” (because I won’t waste your time but none of this is bad).

  • Rear wheel opening lip was rolled by owner #2 to accommodate 335s. Only downside is the paint under the lip cracked. Not noticeable looking at the car at all. In fact I didn’t notice until after I bought it.
  • Front rotors are warped a little from my friend’s track day venture (he tried road racing twice)
  • Deck lid was repainted and 2 holes filled (appears previous owner mounted a Cobra R wing)
  • Front seat has some minor bolster wear
  • Previous cowl hood on car chipped the front fascia a bit and needs better touch-up
  • Both front tires lose air after a week or two. No holes in tires (should have them remounted)

More Pics - https://goo.gl/photos/xWAGX3q3VbsJYhWb7

Asking $20,995 obo

Email me if interested at [email protected] Thanks!
 

pschwind

Member
Established Member
Joined
Aug 29, 2008
Messages
101
Location
Slinger, WI
All right, why can't I add pics to my post? I tried hosting them from my Google account. No go. I tried hosting from Drop Box. No go. I tried making them smaller resolution. No go. What am I doing wrong?
 

pschwind

Member
Established Member
Joined
Aug 29, 2008
Messages
101
Location
Slinger, WI
20170418_192213.jpg
20170217_174955 (1).jpg
20160520_165933 (2).jpg
20160521_153201.jpg
20160617_193759.jpg
20170217_175007 (1).jpg
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,349
Location
Cheshire, CT
Are you trying to post photos from the link above, or other photos?

Here are a few that I quickly posted from your link above. I'm on a MacBook Pro. Open the link. Expand a photo. Right click the photo and copy the photo address. Then click on the 6th icon from the left in the tool-bar and paste the link and click 'insert'. That's it.

KenQwLLf9ps78INapYthTkxyUP3eNbxhlCsqnG6YmdoUYamX-bdjq3oFY-5yY3xlas3nsT8bt1cBSjWwV9A4u00-Exdu4k53KT3R5lJcHAVYSqPUyC4xI_n_Q-3QXwpIzQ_H91Q=w1888-h1416-no


9LB4MYJqa-9gcIPMaeP9y4vZ0XpnDix2nIrx7q0fPBVxwWHgizVEuzWuacGy_7EIkulOKxPuxBQoRpjIAzZxuxLlRYMlmdxi7Vae97R2JUfT_ySjZUb6DoVPvhMUAMz1Dl-0jk0=w457-h343-no


UN7Gy8Yag1f3HAdO9Eoz7UTFGzn58-47jNV0EMBFaTWOXoyAVcxlT7FpfbUGnv0amiqwPPQoZk8LP4mOZ-5XWKj8dzw8Y9mSKeLWU-OphdB65edPrMehfQKyO6U-HFxbbjAVLcY=w1888-h1416-no
 

Users who are viewing this thread



Top