New pistons for turbo cobra

NastyNate420 · Mar 27, 2017

I have NON offset CP pistons and I DD my car ...NO SLAP here !

SVTsteele · Apr 11, 2017

So i know you guys are saying higher compression is fine for street and i understand that for lower hp levels, how much power are you guys putting down?

NastyNate420 said:
10.5 compression here street driven. Just turn down the boost!

Nightmare302 said:
Compression = street car. It gives much better off boost performance. On E-85 10.5 is nothing. I run a set of custom CP's with Trend H13 tool steel pins and total seal steel rings. You can get any company to make you a custom set, the gibtecs are a nice option I just don't like when Ed has people lower the piston.

Nightmare302 · Apr 11, 2017

1200-1300

badcobra · Apr 11, 2017

I make over 1000whp and my car is a 100% street car. I just put over 800 miles on it down in Houston for TX2K and beat the living f@ck of out it the entire time down there. With corn fuel, a proper fuel system and a standalone computer, your possibilities are near limitless of what you can do.

SVTsteele · Apr 14, 2017

Thats awesome to know, im running e85 with triple AEM 320s. I would like the help of the higher compression as my car also has 3.15 gears in it and has 0 balls while cruising or not in boost but i was afraid if i wanted to up the boost it might be a problem.

Nightmare302 said:
1200-1300

badcobra said:
I make over 1000whp and my car is a 100% street car. I just put over 800 miles on it down in Houston for TX2K and beat the living f@ck of out it the entire time down there. With corn fuel, a proper fuel system and a standalone computer, your possibilities are near limitless of what you can do.

New pistons for turbo cobra

NastyNate420

Member

SVTsteele

Member

Nightmare302

OhChuteRacing Owner

badcobra

It's Fast

SVTsteele

Member

Users who are viewing this thread