Racebronco hood GB #2 interest check

racebronco2

Well-Known Member
Established Member
Joined
Sep 23, 2003
Messages
7,268
Location
palmdale, ca
What other mod will allow a 520rwhp Cobra beat most C6ZO6's in the mile? I was only 4 mph slower than a ZR1 and 6mph slower than a modded ZR1 in the mile also.
 

2003DSGMACH1

Active Member
Established Member
Joined
Aug 9, 2005
Messages
772
Location
Orlando
we would need at least 10 people if not more to be on board for that hood. its $2k just to have a mold made. im still trying to recoup the $ from this one lol.

Ok now we need to get 10 or more people on board to get this hood made lol. Steve I know you don't want to start making another hood with you still trying to recoup your money from the last time but if you ever get to where you start making that hood I will buy one for sure.
 

94slowbra1

Well-Known Member
Established Member
Joined
Feb 19, 2007
Messages
2,779
Location
new orleans
i am also running the mrt struts. you will need to order struts with a different rate than the standard 03 cobra hood due to the weight difference. i forget off the top of my head but if you search around it has been noted by myself and a couple others what it is
 

beastmar

Member
Established Member
Joined
Jul 21, 2010
Messages
660
Location
San Diego
i am also running the mrt struts. you will need to order struts with a different rate than the standard 03 cobra hood due to the weight difference. i forget off the top of my head but if you search around it has been noted by myself and a couple others what it is

What material hood are you guys using? I was thinking of the 50/50 or even the duraflex if the weight difference isn't substantial.
 

94slowbra1

Well-Known Member
Established Member
Joined
Feb 19, 2007
Messages
2,779
Location
new orleans
50/50.
It's very light, I can install by myself easily.
It looks killer, I also have some other carbon fiber pieces to go with it
To me there was no question one to go with
 

Steve@TF

Authorized Vendor
Authorized Vendor
Premium Member
Joined
Feb 24, 2006
Messages
19,702
Location
So Cal
I'd be interested in a 50/50 one. Are you requiring the deposit now or until we reach the 10 people mark?

not till we have enough people. no need for deposits till then. and we need to move kind of quickly if we want these by the end of summer
 

Steve@TF

Authorized Vendor
Authorized Vendor
Premium Member
Joined
Feb 24, 2006
Messages
19,702
Location
So Cal
17548720_1262413860509494_1455570715_o.jpg
 

Steve@TF

Authorized Vendor
Authorized Vendor
Premium Member
Joined
Feb 24, 2006
Messages
19,702
Location
So Cal
after discussing with one of the higher up guys at the manufacturer yesterday he's agreed to lower the required amount to make more of these. looks like we'll be good to go!

only issue is we'd be getting started quite a bit later so they may not be done by end of summer. but possibly.
 

jwcobra03

Well-Known Member
Established Member
Joined
Jun 3, 2007
Messages
580
Location
Chalmette, LA
Random question. How are you guys limiting the water entering the engine bay during washing? I need one of these in my life lol
 

Users who are viewing this thread



Top