Like the title says, trying to clean the up the garage. All prices include shipping within the 48 states, please add the 3% paypal fee if your not sending as a gift. For quickest response text me at 224 406 1141.
*air filter, inlet and holder(steeda no heat shield) -115
*stock clutch(15k miles)-115
*stock pivot ball -20
SOLD*t-stat housing with hoses and oem t-stat-80
SOLD*reische performance 170 t-stat-45
*egr everything in pic (line egr sol, boost dump sol, press trans, & valve)-70
*oil pickup-20
SOLD diablo tuner(unlocked)-120
*differential weight-20
*stock t-56 yoke-45
SOLD*coolant cross over pipe with plug-140
SOLD*oem shift knob-40
*stock 03 fuel pumps with hat-200
SOLD*stock 03 heat exchanger with lines-120
*stock coil covers with gaskets -50
*PAC valve springs (only 31, somehow I lost 1,PAC will sell you just 1)-260
*32 lash adjusters-220
(I disassembled 1 to se how they were made, may need to re-crimp or replace) remaining 31 are clean and ready to install
*8lb lower metco pulley -75
*timing chain tensioners-75
(these have been modified to prevent over tensioning from launch/2 step, cleaned and ready to install)
*new 8.8 rear axle bearings and seals-20
solid axle only (i bought the wrong set)
*air filter, inlet and holder(steeda no heat shield) -115
*stock clutch(15k miles)-115
*stock pivot ball -20
SOLD*t-stat housing with hoses and oem t-stat-80
SOLD*reische performance 170 t-stat-45
*egr everything in pic (line egr sol, boost dump sol, press trans, & valve)-70
*oil pickup-20
SOLD diablo tuner(unlocked)-120
*differential weight-20
*stock t-56 yoke-45
SOLD*coolant cross over pipe with plug-140
SOLD*oem shift knob-40
*stock 03 fuel pumps with hat-200
SOLD*stock 03 heat exchanger with lines-120
*stock coil covers with gaskets -50
*PAC valve springs (only 31, somehow I lost 1,PAC will sell you just 1)-260
*32 lash adjusters-220
(I disassembled 1 to se how they were made, may need to re-crimp or replace) remaining 31 are clean and ready to install
*8lb lower metco pulley -75
*timing chain tensioners-75
(these have been modified to prevent over tensioning from launch/2 step, cleaned and ready to install)
*new 8.8 rear axle bearings and seals-20
solid axle only (i bought the wrong set)
Attachments
-
IMG_4722.JPG1.7 MB · Views: 411
-
IMG_4723.JPG1.4 MB · Views: 457
-
IMG_4724.JPG567.6 KB · Views: 384
-
IMG_4726.JPG779.6 KB · Views: 409
-
IMG_4727.JPG788.2 KB · Views: 390
-
IMG_4728.JPG608.6 KB · Views: 379
-
IMG_4729.JPG906.2 KB · Views: 373
-
IMG_4731.JPG742.9 KB · Views: 412
-
IMG_4732.JPG600.9 KB · Views: 396
-
IMG_4733.JPG783 KB · Views: 371
Last edited: