so I'm about to go vmp with 3.0 upper and 4# lower on e85. I already have a 95mm Mac chrome mass air meter housing with a stock meter and am wondering if I can use that housing. I would prefer to not have to use a mafia. All of the adapters I have seen are weld on to convert to a large tonsil style meter.
Which mass air meter
- Thread starter whi tri
- Start date
I guess what I'm after was will a vmp 3000 small footprint tonsil style be enough. I don't want to have to buy another housing if I can use my 95mm.
Are you saying you have a stock mass air meter in a 95 mm housing? That seems like it would peg.
I have a similar combo, TVS with 2.8 upper and 4 lb lower and I use a GT500 slot meter in a 123 mm housing and it gets fairly close. Hitting 4.8x volts or 980 + counts).
I have a similar combo, TVS with 2.8 upper and 4 lb lower and I use a GT500 slot meter in a 123 mm housing and it gets fairly close. Hitting 4.8x volts or 980 + counts).
Yes right know I have a stock meter with a mafia but I don't want to run a mafia with the vmp combo. I was trying to use my 95mm housing but the meter would have to be a stock style.
Users who are viewing this thread
