88mm Turbo Mach 1 part out to roller

GhostRiderblk

GhostRider
Established Member
Joined
Aug 1, 2009
Messages
1,615
Location
Bethlehem, PA
I'm selling my entire turbo set up and drive line minus the 8.8. Basically making my car a street/strip ready roller for someone. It is a 03 mach 1 with 66k on body and less then 3k on parts I'm selling. I'll be adding to this list it is huge. I am not in a rush to sell.

Turbo kit: RACE ONLY $4k plus shipping SOLD





user_online.gif
 
Last edited:

GhostRiderblk

GhostRider
Established Member
Joined
Aug 1, 2009
Messages
1,615
Location
Bethlehem, PA
4.6 Engine Parts
Pistons and block has been sold.


MMR Stage R Cams 4v with arp bolts. have cam card. made by comp cams SOLD
20170121_154757_zpsp5h1gthn.jpg

20170121_154748_zpscypjguov.jpg

20160501_212326_zpsjn8rqdya.jpg


Kellogg Crankshaft stock stroke. SOLD

Manley H beams with ARP bolts. $330 these are weight matched SOLD

Coolant Cross over delete fittings. SOLD

MMR Oil Pump. SOLD

MMR Deep pan bought in 2016. 130
20170121_163120_001_zpsdwrbgvji.jpg

20170121_163059_zpslxda9vab.jpg

20170121_163044_zpsu0eaiqmj.jpg


Spare Set of Stock heads and cams 4v C 4 thread fully assembled. SOLD


Aluminum block ARP Hardware main studs and side bolts. Used 1 time SOLD

head studs SOLD
20170119_172414_zpsotcf3suq.jpg


Livernoise valve springs. 4v. SOLD

new water pump. SOLD

poly urethane energy suspension motor mounts. $80 SOLD
 
Last edited:

GhostRiderblk

GhostRider
Established Member
Joined
Aug 1, 2009
Messages
1,615
Location
Bethlehem, PA
SVE Alternator new. $100 SOLD



Valve covers{need repowder} SOLD and ford racing coil covers $150
20170121_170616_zpsumujclqa.jpg


Mach 1 upper lower intake and throttle body egr deleted SOLD

Fuel spark and Air

Bosch 105lb injectors with connectors. SOLD

VMP 5000 Maf. $140 SOLD

magnafuel 620 pump. SOLD

fore fuel rails newest Gen. SOLD
stock coils oem bought new only 1 year old. Less than 2k miles SOLD

20170121_171816_zpsadntf1lg.jpg



aeromotive regulator. SOLD

Drivetrain
TH400 Trans built for 1200hp with trans brake, locar dipstick, JW bell housing, b an m deep sump cast finned pan with drain. AJE Cross Over. custom drive shaft for th400 to 8.8 flange. 3800 custom stall converter 9 inch. $3k SOLD


B&M Trans Cooler with fan. $150 SOLD


B an M pro ratchet shifter. $150 SOLD
 
Last edited:

GhostRiderblk

GhostRider
Established Member
Joined
Aug 1, 2009
Messages
1,615
Location
Bethlehem, PA
How much power were you making when this setup was running?
I was shooting for mid to low 8s. The turbo is rated for 1300hp. I was in the high 900hp ball park at 15-16psi. Heads were ported and polished. And I only ran a .20 over bore stock stroke and length. The waste gate spring in it now had me up to 23psi idk how much power but I believe it be around 1100. This is all on e85 as well

SVE alternator still available?
Yes

Sent from my iPhone using the svtperformance.com mobile app

Are you selling the heads that are on the car or just the spare set, also interested in the cams and valve springs

Sent from my SM-G928P using the svtperformance.com mobile app

I have loose valve Springs from my ported heads that were on the car. That's what I used with mmr stage r cams.

The heads were just a spare set I have that I was gonna get ported and use for something else.
 

GhostRiderblk

GhostRider
Established Member
Joined
Aug 1, 2009
Messages
1,615
Location
Bethlehem, PA
how much for the roller ????

I'm in the process of getting a fresh paint job on it. But looking for 6k.
Has champion cap 5 billet wheels fronts are 3.5 I believe and Mickey 325 Dr on a 15x10 for rear.

Front and back are drilled and slotted rotors

Built 8.8 arp stud caps girdled cover 31spline Moser axels. Ford racing dif. Upr chrome moly bracing. Tubes are welded as well.

Full mach 1 interior and have an extra shifter boot and bezel.

Qa1 k member up front stock struts with upr coil overs

Rear has strange adjustable shocks and upr coil overs

Upr chrome moly upper and lowers

Battery relocation in trunk.

That's most of it
 

old01cobra

Active Member
Established Member
Joined
Aug 27, 2012
Messages
257
Location
IL
I'm selling my entire turbo set up and drive line minus the 8.8. Basically making my car a street/strip ready roller for someone. It is a 03 mach 1 with 66k on body and less then 3k on parts I'm selling. I'll be adding to this list it is huge. I am not in a rush to sell.

Turbo kit: RACE ONLY $4k plus shipping
88mm s400 base. 88mm in. 96mm ext. 1.32. t6 flange with blanket
cg fab hot side. front facing headers and y pipe with t6 flange. also has 5 inch down pipe with arf bung.
cold side is 4 inch post inter cooler and 3.5 pre. all custom aluminum. slot style maf flange.
60mm waste gate atmosphere vent
50mm bov non circulation
custom 4 inch inter-cooler. Would be good for high hp.
MMr/canton oil filter remote.
all couplings and band clamps come with.
this is mainly for a race car only but you may street it at your own will.
IMG_20160512_015258_zpsnjcvjwzn.jpg

VZM.IMG_20160502_142910_zpshw02sg4g.jpg


da5d57ca-70eb-4d8b-a145-271eca51610b_zpsuapprkcl.jpg


20160423_144253_zpseposqpke.jpg


20170121_165232_zpsb53fha1i.jpg












user_online.gif
you still got the whole turbo setup?
 

Users who are viewing this thread



Top