Recent content by ubenbit

I am currently running with a 100 shot of nitrous with a dry kit, and I am thinking of increasing the shot to 125. Can I safely run a 125 shot with no problems on the stock fuel system? The car is a 2004 Mach1 (same engine as 99-01 Cobra). I would have the car retuned with the increase in...

I have an o4 mach1 mustang with an NOS 100 hp dry nitrous kit installed. I wan attempting to get a custom tune for the nitrous, and the A/F ratio went dangerously lean, (18.1 A/F ratio) when my tuner tried to spray the engine. He suggested that I needed to replace the stock 24LB injectors with...

Does anyone know how to get hold of Joe Lynch? I am in immediate need of his technical expertise. I sent him a PM today and need his help fast before I use the nitrous kit on my car. Thanks, ubenbit

Does anyone know which wire in the pcm wiring harness is the coil positive wire? I am trying to locate this wire so that I can tap splice into it, my tach driver and rpm activated switch for my shift light. I tried going to the dealership and talking with a knowledgeable tech for assistance...

i finally woke my snake up from a 2 month nap, washed and clay barred it and then drove it like i stole it for two straight days. i noticed rather quickly that i was getting hundreds of tiny spots on my windshield which upon closer inspection of the car revealled that the front of my car was...

Has anyont out there had their stock mufflers removed and replaced with the dynomax bullet race mufflers? I just thought this was something to consider before dropping $600-$700 on an exhaust system that might net a very little gain in the torque department. I believe in cost effective...