TA28's latest activity

All fr500c / shelby / gt heads were oval intake port. No notch like your picture. But the gt on the side is correct for those heads...

Those are not shelby or fr500c or 04 05 gt heads. Those are tumble port cobra/ aviator heads . Some cam caps are gt fr caps. Good luck...

I have set cobra dohc covers .coil on plug. They need work just refinishing. No cracks or ovaled holes. Someone started stripping them...

I have set of DB/DC heads 9 thread. Used no cams but everything else.

I was looking at a Riley Scott dp car minus ALLOT. and not cheap. Till I found out electronics was 250k + I never went any further .

these were from roush dp program they tried a high rev motor build. 13.1 + comp ratio. 1 head I was told 1000 hrs work done to it.how...

Roush intake is a nice piece for sure most complete 1 I have seen. You do know will not fit 4.6 block, deck heights are different from...

Works on 5.4 and the 5.8 BUT you need spacers to fit deck height

I'm interested in the intake base and willing to work deal.also intake take lightning throttle body not cobra. I have 1 too. And the...

what more important. The heads or intake ? Seriously. I have 2 sets of fr500c heads. 1 set nos with ford racing ss valves shelby...

I have 3 sets of trumpets all from roush, also have early magnesium side covers. And fr500c specific fuel rails .chris

Also have set std silver coating is crap. And set of carbon fiber that need tlc. Just rejell coat should be fine..

I have set of nos crinkle blue ford motorsport. 350 + ride.

I'll take the valve cover kit.chris pm sent

Got 1 off a fr500c will that work? Has extended water neck not taped for an fitings on oil cooler lines chris