Recent content by Swiss026

Bought the Eaton off a guy who had 18,000 miles on it. He had the port done by Don Walsh and had less than 1,000 miles on it since the port. Comes with a Steeda 3" pulley, the plenum and throttle body (which aren't ported). Also have a 90 mm Lightning MAF if anyone is interested. 2 lb lower...

I spent a while trying to find a good write up on how to fab up some 03/04 fogs onto a 99/01 front bumper, but never found a write-up that was complete so tried to snap some pics as I went along to make it easier for others trying the same thing. 4 #8 1 inch body screws (just a longer version...

I spent a while trying to find a good write up on how to fab up some 03/04 fogs onto a 99/01 front bumper, but never found a write-up that was complete so tried to snap some pics as I went along to make it easier for others trying the same thing. 4 #8 1 inch body screws (just a longer version...

Finishing my 4V aluminator conversion and with all the parts I picked up, I was thrown in a "4 lb" Metco lower pulley. However, it's not a 4 lb lower. It measures at about 9.75" and according to Metco's site that makes it a 8 lb lower. It is new and was installed but removed prior to starting...

Set of NEW Accel coil packs - came with the motor (03-04 Cobra) I bought off a member on this site however they will not be used with the motor swap. Motor has never been started, but coil packs were just placed in with shipment so have a little dust on them. New on Summit these go for just...

Quick question... I recently bought an aluminator block which is coming with a Metco 4 lb lower pulley. I am pairing it (for the time being due to cost) with a stock Eaton which has a 2.93 pulley installed. I've heard many different things about maxing out the Eaton. Would this combination of...

Doing the ole' 4v conversion to my 04 - in the process of acquiring the motor with everything except a power adder. Hoping to find a decent Eaton to hold me over until this main expense is through before upgrading to a Whipple. Curious what's out there. The more with it the better (throttle...

Want to get out of my KB'd 04 GT and into a 4V Terminator. Hoping to find something in the Midwest. Hoping to stay around $20k. Please just let me know what you have - coupe preferred over 'vert, but will take either. PM or [email protected] works well too. Thanks guys!