Recent content by SVTStampede

  1. SVTStampede

    Will Forgestar CF5V 19X10 42 offset fit the front?

    Hey man, thank you for your personal experiences and that link. Gives me something to play with! Do you happen to remember what the offset was on your 9.5s?
  2. SVTStampede

    Will Forgestar CF5V 19X10 42 offset fit the front?

    Has anyone tried the 19X10 42 offset CF5V in the front of an S197(11-2014 with Brembo specifically) without a spacer? Or any of the forgestar models in that measurement. I've seen some mention that they might not fit without spacers due to Brembo clearance, so checking to see if anyone knows...
  3. SVTStampede

    Official: 2011+ Mustangs Wheel and Tire thread

    How is your straight line traction holding up with those? Nevermind, I glossed right over it. Need more caffeine. Thanks for the input on those!
  4. SVTStampede

    FRPP Relocation bracket issue

    For comparison. BMR's spacer. Matches the measurement of the OEM and BMR control arms.
  5. SVTStampede

    FRPP Relocation bracket issue

    Thank you for the advice on the bushings. I try to keep noises to a minimum. I agree with your conclusions. After looking around I haven't seen anyone else mention the fitment issue, so I'm guessing my kit has pieces out of spec. I sent the requested pictures to FRPP as they requested, but...
  6. SVTStampede

    FRPP Relocation bracket issue

    Spoke to FRPP this morning, and he said he has never heard of a problem with these brackets. Got my calipers working, and they are about 1/16 too long compared to the factory brackets(both sides). As I have a history of breaking things, I learned brute force isn't always the answer. So just...
  7. SVTStampede

    FRPP Relocation bracket issue

    I'm installing FRPP control arm relocation brackets, and the metal spacers for the original bolt locations appear to be too long to fit inside the original control arm mounting location. Of course my digital caliper died on me, but they both are about 2 9/16 inches wide. This seems to be about...
  8. SVTStampede

    Replacing a wiring Harness that is no longer made.

    Could try CASPER'S ELECTRONICS, INC. and see if they can make one.
  9. SVTStampede

    C8 Corvette making potential GT500 buyers rethink their options

    As of right now there are people ordering 2020 1LT vettes at MSRP with no markup. There are plenty of dealers with allocations left. You can refer to the list on corvetteforum for which dealers to contact. So yes, the C8 is legitimately a 59-60k car. It's not like it's a Mustang base either...
  10. SVTStampede

    C8 Corvette making potential GT500 buyers rethink their options

    I am resisting ordering one, but there is a good chance I'm going to give in this week. 1LT Z51, seems awesome for 65kish.
  11. SVTStampede

    Considering swapping Roush for GT500 ABs...couple questions

    I'm running Borla x-pipe(with factory cats), Borla over axles(no resonators) with single tip Gt500 mufflers and love the setup.
  12. SVTStampede

    Heat exchanger without cutting 2012 CS/Boss front bumper?

    Probably a long shot by how tight the 1 inch Magnuson heat exchanger fits in there(and it's pushed all the way back), but do any other heat exchangers fit behind this bumper without hacking it up too much? Mainly I don't want to cut the 2 "ribs/supports" in the lower opening. I don't need...
  13. SVTStampede

    Ford Introduces All New 2019 Ranger

    Cool, and the eco 2.3 is a good engine. Feels way faster than it is and fun to drive, at least it was my wife's S550.
  14. SVTStampede

    3rd Party Pic Hosting is a Thing of the Past on SVTP

    That is amazing. Truly one of the best mustang sites out there.
  15. SVTStampede

    Dreams Do Come True

    That car is awesome

Top