Recent content by SVT CAMR

http://www.chicagolandmustang.com/forums/showthread.php?80486-ATTIC-CLEAN-OUT!-THE-FINAL-CHAPTER I'm selling these on a local site. All I have left are an alternator that is good for core or rebuild some radiator fans and other stuff.

http://www.chicagolandmustang.com/forums/showthread.php?80486-ATTIC-CLEAN-OUT!-THE-FINAL-CHAPTER listed on a local site. center console 1998 cobra and some other stuff is all that is left.

Never mind I got it done

I have asked this in another forum but would like to hear from the 96098 specific cars. It seems when I turn on some loads like lights, fogs, and AC the car will surge and eventually die when at idle. When I start the car when cold it idles at 14.4 volts. As the car warms up and I have...

I traded some old mufflers for a set of stock axles out of a 96-98. Upon inspection I noticed that the spline length was longer on one than on the other. Is this normal? or did I get 2 different axles?

What a work out opening the trunk. I goes the struts slowly degraded over time and I did not notice til now. Anybody else notice this? I ordered a new set that is for our cars. (94-04) here they are. Has anybody else tried these trunk struts? I will have them on Friday. The price was right...

Ok here is how it goes. Some time the car will not start after warmed up or if it does it will surge in and out and I will have to give it gas to keep it running. On first initial start in the morning it fires right up. Not sure if this is temperature related or what. I checked code on my...

After 13 years I re-installed the AC piping and compressor back into my car. I blew all the lines out. I have installed all new "O" Rings and 8 oz. of Pag 46 oil w/ UV into the entire system. I believe my system can take up to 34 oz. of freon. I bought the harbor freight evac pump...

Front brakes. ordered new rotors and hawk pads. I can barely slip (I mean beat) the left side caliper on. when I do it is so tight it will not spin! WTF! I'm about to light this thing on fire. The right side is also tight but acceptable I think ( Slight drag). There is no play what so ever I...

Will a stock shifter handle from a 2001 (Not sure if 3.8 or 4.6) fit a aftermarket shifter on a t-45? Yes just the handle portion.

I was wondering if you 96-98 guys would text me a 3 pics of you AC line connections. I have the clips that go over the connections and not sure which goes to which line! 1) @ the fire wall (the dryer connections located passenger side engine compartment. 2) @ the condenser connections (...

Sold!

I have a Ford Racing AC Delete Pulley. 96-10 In good working condition. I removed it off my car today!

Ok i have all the "O" Rings installed along with the compressor and Dryer. I'm about the install the condenser. I need some pick of the hoses and where they tie in. I need pics of the fire wall passenger side of the AC connections. Then as they run above the manifolds across the side of the...

SOLD!