i was working on my truck today and found this:
the oil is coming from the pass side valve cover. the drivers side i have installed under the intake boot before the throttle body and i have NO oil in there. the pass side i have have hooked up after the throttle body. it seems that when...
???
direct from Jesel:
Overhead Cam Follower - Racers have found that the standard O.E.M. cam followers just cannot stand up to extreme RPM's and loads from increased spring pressure, supercharging and fast lift cams. JESEL's new Double Roller Cam Followers operate with less friction by...
after work tonight a co worker has never gone for a ride in my truck and wanted to . it was 65 degrees out nice night no traffic. turned onto the street and kinda opened it up to about 85. slowed down to 55 and nailed it to show how easy the back end comes out and around. turned around and kinda...
what are your iat1 and iat 2 temps at? also include your boost/pulley combo for blower speeds. i'm looking more for the difference between iat1 and iat2 temp differences. mine i think are running high but just would like clairification. also post if you have any intercooler cooling mods.
TIA...
yes my whipple is for sale
2.3L POLISHED original LYNSHOLM compressor NOT the whipple Compressor.
I will include 1 upper 3.250 with pruchase. included is everything (most of which are not even being used) from the midplate to the intake box and all vac lines and egr tube. still in...
like said in title. rears are hoosiers 28x14.5x16 DOT's and fronts are 255/50/zr16's. slicks have maybe 15 passes on them, no major burnouts. still in great condition. fronts are brand new. have maybe 15 passes on them also. All balanced and ready to install. Also have 12mm open ended lugs if...
as the title says caged INTERCHANGEABLE lower. comes with brand new spindle and a gatorback belt for stock sized upper. Make offer. need to sell. has been sitting for 2 years at least and i need to get rid of it
Pic:
I accept paypal plus paypal fees
Will
Well dyno testing of my whipple will have to wait longer. My torque converter began making a lot of noise so i pulled my tranny to send it out to PI. When i disconnected my pass side long tube from the cat cooland came pouring out. So i pulled the pass side head for a head gasket and here is...
well i've got 300 miles on the kit and figured i would pop in and give an update. First i absolutely love this setup. It looks great and performs great. I have no noises from the kit, no lockups etc, besides the slight procharger whine at idle. The power comes in very quickly. mated up with my...