Recent content by RusWolf

Thank you.. I guess it would not hurt to check it.

Guys, posted in the video in the other thread. If some of you can watch and listen, that would be great.. Thank you!

Hey all, I was able to take the car for a drive over the weekend and record the sound. I was not sure if it will show up on vide, but it actually did. here is a video.. That grinding/rolling sound when i'm OFF the accelerator. Car has full suspension, Aluminum DS and McLeod RXT 1000 HP twin...

that would make sense right.. new TOB and new pilot bearing.. but unfortunately some shop are just so scummy that they don't care and will not suggest simply bcuz they don't know. I even asked them if there is anything else that is needed like bearings and they said no its fine..(back than I was...

When i first WG'd it i picked up about 80 tq.. so the answer is yes... WG it.. and even with WG, the TQ does not come from 2k RPM.. it wakes up at 3500 RPM about 1K lower than without WG.

ahhh yeah.. ahha totally forgot that name for it. and +1 on getting a new tune after WG installation. OP you can drive OUT of boost and to the dyno shop.. that would be ok, but i would not be driving and flooring it.

thanks for reply, I thankfully do not have and never had any noises from the transmission. literally this noise just showed up after suspension mods and only when off the gas.

Hey, it would be easier if you posted questions 1-2-3 etc.. anyway. 1) TB I assume you mean throttle body? If yes, that IMHO you will need a tune since you will be changing how much air is coming in. 2) JPC TIAL BOV, i run it as well and I blocked off the stock valve and removed it. No...

So i had both pilot and TOB changed. Centerforce TOB and Ford Racing high load pilot bearing. Noise, now quieter but is still there and I can hear it only when going 50+ and letting off the gas and rolling in gear or neutral. Need some help identifying an issue, locating the noise. Created...

No, they are self adjusting.. similar to Bilstein shocks.

Hello all, BLUF: I need some help identifying a grinding sounds when i'm above 50 mph and only when off the gas, when I am even slightly accelerating or just slight pushing on the gas pedal sound goes away. Car is 2011 5.0 Basically car has full suspension and it all started after the...

If you basically just google 2011-2014 Mustang Koni special active.. it will pull up. I know steeda has them, lethal, cj and i think AM. They are basically Koni’s version of Bilstein B6 shock. I wanted to get Bilstein’s but when I found Konis i went with Koni for basically same/similar...

Thanks guys. I am going to replace both. Ordered new TOB as well. Went with centerforce branded one, seems like it has good reviews, and it was on amazon prime for $125 shipped. Originally wanted OEM, but don’t feel like waiting an extra week to get from online seller/dealer. And crazy thing...

I don't have any experience with aftermarket panhard bar, but i am running full suspension on the car now with Whiteline watts link and the car drives really well. Watts link was my first suspension mod (got it for an amazing deal $650 brand new) and could not resist. I was not sure If i need...

double post.