We run the same wheels and tires on all 4 corners. Wheels are P6GR 19x10 front with 35 mm offset and 285/35/19 tires without spacers. The rear sits a little wider than the front but can at least rotate the wheels.
Doug,
We do not have any experience with the SVE wheels. The GT350 brakes are very large in diameter and requires any 19" rim to have a larger than normal barrel diameter. The wheels we have verified in a 19" wheel that fits are the Project6gr wheels, and Apex S550 Mustang - Ford - Shop By Vehicle
With a 5mm spacer longer studs should not be needed. As long as you can get 10 turns of engagement from your lug nut you'll be fine. The S550 bolt pattern is 5 x 4.5 or 5 x 114.3 and 5mm spacers can be had from just about anywhere. I know Summit Racing carries some.
If I remember correctly. The OEM PP wheel just about fit over the shelby brakes. The only issue was the OEM 19 rim I.D. is smaller than aftermarket 19" wheels.
Sorry you're correct. You may need a spacer in front. You may be able to fit your 20x9 on front with a 5 to 10 mm spacer. For the best fitment I would recommend a 20x10 with a 35mm offset. What brake package is currently on your car? The 4 piston 14" or 6 piston PP 15" Brembo?
We are running 19x10 all around with 35mm offset in front and 50mm offset in the rear. You will not have any problems with the front but may need a 5 to 10mm spacer in the rear.
These should have no problem fitting over the brakes. If you order them from Forgestar they are built to your specifications. http://www.forgestar.com/wheels/collection/rotary-forged-monoblock-series/f14/
We just do not have enough used knuckle parts to sell any reman's and we don't have an ETA on when we might have more. We do have new OEM parts in stock ready to ship.