Roush6018's latest activity

you should remove the driveshaft to check the U Joints, they should move smooth in all 4 directions, if one direction is looser than the...

Hey look, i got 8 out of 9 right and i was just helping a mustang owner out. he did not mention the brand on the pulley so i guess it...

I agree for most of this, coil covers are worth $40-50. The local junk yard sells them for $10 each off any 4V. The rest is pretty spot...

2.7 upper pulley brand new - 40 2003/2004 Cobra coil Covers - 20 Eibach Sport springs brand new in box - 150 Stock H pipe (I’ll...

most of the weight is in the engine and transmission. they are in the front half of the car. its the front suspension doing most of the...

( here is where i share how i feel about this mustang cobra, it really doesn't matter, because no matter how bad this mustang is.... at...

this is good results. the ECM is controlling the fuel pressure. it sees the fuel rail pressure sensor and it adjusts the voltage to the...

you should learn how to check the backlash on the rear gears. if it has too much backlash it will cause the clunking sound. you will...

yeah unfortunately the cams might have messed up a valve and the problem could be due to a leaking valve, intake or exhaust, causing...

ok i do agree the car should run good and not stall with the aftermarket MAF and Bigger Injectors if it is tuned for those parts. the...

so you want to know what the fix to your cobra is? i worked very hard to fix the problems with my cobra swap. i do remember having some...

if you change the MAF size (from 80mm stock) then the ECU needs to be adjusted to the new 90mm MAF you want to run. same with changing...

i have got a certificate of salvage before. my rolled bronco was on my flat trailer, i went to the DMV and traded in the title i had and...

im watching silently because i like to check on the SVT community and see whats new. this car is not a project car for someone to think...

i would recommend OP and the new member try to replace their CCRM and report back. remove the right front fender liner, disconnect the...