Roush6018's latest activity

  • R
    So the Tip I have is to put a roll of electrical tape vertical between the exhaust pipes under the diff when you go to tighten the...
  • R
    It is a big ass rock formation out on the beach in Morro Bay off of Highway 1. It is supposed to be a volcanic rock. it is bigger and...
  • R
    So you want to send OP to Morro Bay and not mention the Elephant in the Room of that town.... ?? My wife wont even go back to that town...
  • R
    Hey, don't worry about those 2 brackets. They don't remind me of any part on my mustang when i did my 03 cobra swap. They don't have...
  • R
    Roush6018 replied to the thread Normal STFT high LTFT.
    i have an idea on where the engine could be getting a vacuum leak. i did some EVAP repairs on my cobra a year ago. First i replaced the...
  • R
    I think you can drive the car with the ticking noise and change the Engine Oil more often, i would not run the additive to help with the...
  • R
    Roush6018 replied to the thread Riced out my Honda!.
    Some red parts belong on a Honda. However, Red Stator cover bolts are way too Fancy for any dirt machine. please get the nickel plated...
  • R
    you need to measure your ALT pulley diameter too. i have a J2 FAB alt , stock lower, stock upper on a eaton and billet idilers. i tried...
  • R
    Roush6018 replied to the thread G35 key won’t turn.
    a quick little search and i came up with " G35 immobilizer control unit ". its a black box with a ring around it. it installs on the...
  • R
    Roush6018 replied to the thread G35 key won’t turn.
    there is a sensor around the ignition switch for the keyless system, so get that part replaced with a new one, then tow it to the dealer...
  • R
    if i was getting a MM K-member for my car i would order with spring perch. i would run stock 03 cobra control arms and run H&R Sport...
  • R
    Roush6018 replied to the thread Rebuilt Cobra.
    Black on Black on Black! Riding around in the Coupe! that car is pretty sick congrats!
  • R
    looks like a STEIG Stage 5, basically the max porting that can be done. serial 169006. that is a very good porting job. with a 2.76...
  • R
    Roush6018 replied to the thread Exhaust Tick.
    i have a tool in my mechanics box that goes in both ears and it has a rubber tube about 3 feet hooked to a metal rod. its a mechanics...
  • R
    Roush6018 replied to the thread Exhaust Tick.
    you know when you pop the hood and look at the engine i can hear it missing on one cylinder, its not ticking in the engine bay its...

Top