Recent content by ROADWARRIORSVT

  1. R

    Ford 9" Spool/4.56 Gears

    Up for sale is a brand new, still in the box, spool for a Ford 9" axle, 28 spline, a set of "Genuine" brand 4.56 ring & pinion gears, still in the sealed plastic and the master rebuild kit. I found out my axle splines were twisted so the parts were never installed. E-mail me at...
  2. R

    FS: Spearco Air To Air Intercooler

    I bought this for my 97 Cobra but went to a water-to-air. Spearco. Measures 23 3/4W x 17 3/4 H x 3 3/4L. It has 3.5" inlet and 4" outlet. This would be an easy bolt-on for anyone using the Sullivan intake with the foward TB opening. It was made for a SN-95, but could be modded to fit almost any...
  3. R

    FS: 3.55:1 Gears

    OEM 3.55:1 ring & pinion gears out of my 8.8 axle. They have 29,3XX miles on them, and about 1/2 dozen easy 1/4 mi. launches. $100.00 plus shipping. PM or e-mail me at [email protected]
  4. R

    What Some Police Officers Would Like You To Know

    What some Police Officers would like you to know............... Your five year old kid getting pushed down by another five year old kid is NOT a police matter. Talk to the other kid's parents, not the police If your kid won't do his homework or do his chores, 911 is not the answer We...
  5. R

    On Went the Slicks/Skinnies

    OK, since I blew up tne Cobra on the dyno, I got a little bored and wondered how they look on the Marauder?
  6. R

    Spearco Air To Air Intercooler

    I bought this for my 97 Cobra but went to a water-to-air. Spearco. Measures 23 3/4W x 17 3/4 H x 3 3/4L. This would be an easy bolt-on for anyone using the Sullivan intake with the foward TB opening. It was made for a SN-95 but could be modded to fit almost any Stang. Also included are intake...
  7. R

    Dyno Video: 5500 RPMs And It Broke!

    I was breaking in my F-2M blown 97 Cobra, not a 94 as said in the vid. Absolutely the best parts $$$ can buy. It was assembled at local machine shop here in Hawaii. Can't point a finger at anyone until I disassemble the motor and try to see what went wrong. Three pulls at 1/2 throttle, was...
  8. R

    Help With Primary Cam Gear Timing

    OK, I've got a 97 Cobra with a FAST and FAST E-DIS. My timing is about 90* off. With my #1 cyl. at TDC, the timing mark on the Primary sprocket has'nt reached the cam position sensor. By the time it is aligned with the sensor, #1 cyl. is past TDC, causing all of my timing to be off. The...
  9. R

    Who Makes A 8.8 Axle Brace?

    I need an 8.8 axle brace. I'm looking at Team Z Motorsports brace. Who else makes a beefy brace for an 8.8? Here is the axle so far.
  10. R

    Busted Differential (pic)

    edited
  11. R

    On my 4th clutch cable-HELP!!

    Ever since I put on the UPR quadrant (& firewall adjuster), I've been snapping the clutch cable about every two months. The first pick-up hook severs the cable. Tried grinding down the edges and dipping quadrant & cable in Plastic dip (coating) No good. Just installed my 4th cable. I've also got...
  12. R

    I need cheap shipping to Hawaii!

    I won an aution on E-Bay for a Lincoln Arc welder. Fed Ex Ground wants $182.00. Even paying that amount in shipping will be cheaper than buying one at Sears locally, but its cutting into my savings. Anyone know of an alternate way of shipping ? The package weights about 110 lbs. Coming from...
  13. R

    Anyone going to FFW in Commerce, GA.?

    Hey Guys & Gals, I'm flying outta Hawaii tonight (4-12) headed to GA. I'll be at FFW in Commerce this weekend, 4/16-18-04. Anyone else here going? I'd like to meet you if you're gonna be there. I'll PM you with a contact #. Hope some of you guys can make it...
  14. R

    Bypass valve too small?

    How can you tell if your BOV/Bypass is too small. I have a bypass routed in to the intake. This is from my old ProCharger P600B kit. I'm now running a Novi 2000 set at "about" 15-18 lbs of boost. Head unit has a 2.75" pulley. Have'nt taken it past 4500 rpm's due to lean condition. Anyway, what...
  15. R

    Novi 2000RR 10 or 12 rib pullies

    Anyone know who makes a 10 or 12 rib pulley for the Novi 2000RRs? Also would need the rest of the pullies for a 97 Cobra? I've seen them but the owner may not want to part them away from the blower he has for sale. Can't afford cogs!! Thanks.

Top