RandomForumGuy's latest activity

I have basically the same setup except cp Carrillo rods and pistons and different cams. I pieced it together rather than buying a long...

Sorry to hear. 99% of the time engine rebuilds are a result of a failure and arent planned (ask me how i know). But like HK said, a...

@Pribilof @13COBRA Thanks gents, unfortunately for me palm beach only wants ms109 for its current setup. I asked about switching to...

Hello everyone, Figured this is the sub-section to post my question even though it looks to be mostly e85. I am in the...

Not exactly what you were looking for but i believe it was a super snake option...

In terms of efficiency yes. Lets say it takes 50hp to drive a whipple at 20psi. It would only take 25 to drive a 2.65 at 20psi. Those...

I dont think it will make it to 1000. I just did mine and it made 1005wheel with the following Iron 5.4 block, 8.5:1 Ms109 octane Stage...

Thanks for the help Gents. I just got off the phone with RPG engines (unrelated), and they said that the bolt is a thermostat bypass and...

2011 Mustang 5.4L (4V) Oil pressure at 2,000 rpm (engine at normal operating temperature) 276-414 kPa (40-60 psi)

What would be the main cause of increased temps with higher oil pressure? I recall stock being 65ish under cruising rpm so im already...

Also no error codes yet, as i think im catching it right before it gets too hot for the stock parameters. I recall someone saying 245...

Oil pressure and temperature are monitored by autometer elite series gauges installed in a sandwich adapter between oil filter and the...

Coolant level is good. It did not start after the 170’ thermostat, it started while the shop was tuning the car on a dyno from what they...

Good afternoon everyone. Im currently battling engine oil over-temp issues. Long story short, oil gets up to 240 while driving lightly...

https://www.ebay.com/itm/334341342475?hash=item4dd84c050b:g:11cAAOSwifFiFphI&amdata=enc%3AAQAIAAAA4Fb9Uv8es4jjUpiISqtxXOQUpYS%2Bib0CrohfH...