Nervouswreck's latest activity

Is this the same engine that has high crankcase pressure?

In my cars, I run 5W-30 M1. If I used it more, I'd run the Amsoil. Additionally, if you are planning on running the Amsoil full...

Do you do a lot of winter driving?

Having had plenty of heads rebuilt over the years I can tell you that means nothing. I can't tell you how many times I've had machine...

If they were not careful installing the new seals over the valve stem, they could have nicked the inside of the seals. I used a soda...

I'm not an expert, but I have two cents to toss in the idea hat: If it's definitely oil burning, then the motor is obviously consuming...

2V and 4V ones are different. I used a large modified c clamp version to do my heads on the bench. My buddy used the OTC Brand tool to...

There wasn't enough room to move the tool and press down on the spring. We made a couple mods, but still ended up pulling the engine to...

Thanks for the info and link buddy. Can i ask why you don’t recommend this tool for in car use? Thanks Sent from my iPhone using...

This is the one I've seen. I don't recommend it though. At least for in car work. https://www.summitracing.com/parts/oes-24434/make/ford

They make a tool to do it with cams still in place? Sent from my iPhone using the svtperformance.com mobile app

Freedom racing makes a tool and I did the entire pass side in the car, it was a nightmare. Some valve locks I'd get back in under a...

Ok, there are 2 ways this is going to work…. Both will require a compression checker kit modified to compress the cylinder to hold the...

If this were my car, the engine would be coming out. Let us know how it goes either way. You have some sound advice already so I won't...

Was gonna grab a bolt on spring compressor tool from eBay Sent from my iPhone using svtperformance.com