A friend of mine in Japan has a sweet restored 96 Cobra and wants to run a set of FR500 wheels on it. In Japan, car wheels must have a DOT stamp on them before the government will allow them to be run on a car. It would be bad if he were to buy a set, have them shipped to Japan and then find...
Thanks! Glad to hear that the Speedhut solution is still working after years. I was a little worried that the higher frequency might be bad for the panel, but your evidence suggests it isn't. The lower voltage may actually make te panels last even longer. Who knows. Good news though.
That's a good point. Dimming the cluster will reduce the peak-to-peak voltage which should help to extend the life of your cluster. How much it would help, I have no idea, but it sure can't hurt.
Time for an update. I have actually been doing a lot of work on this project in spite of not having any more failed inverters to analyze. To recap, I have been able to diagnose 3 bad clusters. Two had bad EL panels and one had a blown inverter.
It is easy to diagnose a bad panel. If you...
SOLD! I have had this Standard Range Speedcal in my lab for many years. I used it many years ago in my lab to make sure that my T56 lockout unit would work with a Speedcal in the car and it has been collecting dust since then. It was sold to me by a guy who got it from Dallas Mustang in 2003...
I have only seen one bad one so far. It had an open circuit in one of the transformer windings. There was no external signs that anything had failed. Other failures may be visible, I don't know yet. Another reason I want to see some more failed units.
I want to learn what naturally causes them to fail. Forcing a failure wouldn't tell us anyting. I was suspecting that the transistor would be the thing to fail, but so far, I have only seen one transformer fail. Unfortunately, I have been unable to source a compatible transformer. You should...
Unfortunately, they simply get dimmer as they age. This is what I got from an EL supplier's web site:
Unlike conventional lamps, EL lamps will not burn out. There is no filament to break or gas to escape as with LED’s. They do lose some of their brightness over time. Lamp life is related to...
I just finished working on a couple of clusters that were sent to me, a cluster from the guy's car and a donor cluster plus a spare Glowhut inverter. It turned out that all 3 inverters were fully functional. The EL panel from his car was dead, but the EL panel from the donor cluster was...