LEATHAL VENOM's latest activity

Looking to do better at the drag strip with the 2013 GT500 this summer and wanted to get a set of drag wheels/tires to replace the...

Bought this 1/4 scale beauty about 7 years ago in the original box from a Ford Dealer.

01yellercobra - If the voltage is right at the pumps with the way the BAP is wired and the only thing I’m doing different is removing...

BAP was installed 12 years ago and it was wired pre-FPDM without the hobbs switch and no dial is in the car to adjust. Is it suppose to...

Still struggling with code P0193 - I've replaced the Fuel Pump Driver Module and the same code comes up P0193 - when I turn the key on...

The FPDM is just plug and play so I will try that first, if the light is still on I will bypass the BAP to rule it out.

Just a 2.4 upper, JLT CAI, and VMP Tune - 11.6 @ 127 is the best I have done with it. I find the car is hard to launch with 20" tires -...

No I havn’t, I will look for that on the scanner and see if I can monitor it. I ordered a new FPDM yesterday thinking it may be damaged...

Having a little fun at the track.

2003 Cobra - car shut off while driving the other day and after inspection found power at the pumps but no fuel pressure - order new...