jwcobra03's latest activity

Upload the vid to youtube and post the embedded video here.

Have someone use a breaker bar and apply steady pressure on the lower, then whack the tri-bar in the correct direction. It'll break...

Do yourself a favor and scoop up a Nation's Alt.

Was your TPS showing it was fully opening on any of the logs while tuning?

Just an under the hood Moroso style tank.

I had a 2.6 and was on E. 22lbs/3.00 griptec pulley, the blower was fine but when I went to 24lbs, the IAT'S went up 15* on avg. Every...

.

Well the weep hole is working but I’m dripping water from this. Anyone know if there’s a seal in there?I can see 3 screws holding it...

She moving my brother!!!

Was able to get a 12” bit and drill the bottom of the plastic weep hole. Crap ton of water came out. Sent from my iPhone using...

I’m checking my weep hole and it appears to be completely melted over. Beautiful!!!! Sent from my iPhone using svtperformance.com

It’s not the heatercore. I changed that last year. It’s happening with the ac on only. I rarely of ever use it but I did for awhile...

Sent from my iPhone using the svtperformance.com mobile app

I use a 1/4"-6" long ball end socket and a 6" wobble extension and it works fine. I did grind the ballend socket down some to help get...

Here is my solution, just need to verify with logs that it will work. I sent my upper pulley (3.25") to Carbonite Coatings to get it...