lookin to buy a 04 cobra whit 20k miles whit 2.3 whipple and all the goodies , but looking to swap the 2.3 for a 3.4crusher or 7675mm. What number you guys running whit these setup PUMP Gas , Stock Compression and what # ? 80% Street Car 20% Strip Car dont know what to choice for the car but...
here we go ,2001 Bullit 2v here my setup Novi2000 18psi psi ,Build Bottem End, Custom Cam, Tfs 44cc head , Fuelsetup and i run The Stock Bullit 01 Intake i want to change to Victor Jr , Elbow 6061 , 70mm T/B any1 know what gains ill gain i know i lost some low end torque but i need good flow at...
what the best intake manifold for a 2v Novi2k i want to change my StockBullit Intake for Victor Jr whit 6061 Elbow or TFS Track Heat / 75mm TB , witch one is thebest for high Rpm ?
so here my question i see 20.5 psi at 6700 rpm stock p.i head (valve over size , ported chamber) whit a novi2k (3.125 upper and 10% lower) if i go whit tfs 44cc unported did my boost will downgrade a bit ? and how much at the same Rpm you think ..:pepper:
i dont know how much power can make my setup approx , here my Mod
# 15,9Boost at 6k Rpm (LASTDYNO before Cam and ported Head .. looking for 16degrer of timing on 94 Oct whitout Meth , on a very very low reading mustang dyno
60lb Siemens ev1 Deka injectors
Twin In-Tank 340LPH Fuel...
i got bullit 01 , novi2k (3.125upper 10%lower saw 16Lbs whit stock Head at 6k rpm ), (2v) build shortblock 9:3 , Full Exhaust , TrickFlow Intake , frount mount , Inj W/Meth blabla the question is i dont know what head to choice ...im lookin for Tfs twisted wedge heads , i want a aggresive Top...
i got novi 2k ,2v Built Bottom End 9:3 , Stock head , Stock Cam , Bullit Intake , ARH L/T 1 5/8" , X pipe , Magnaflow CB , Frount Mouth , Meth/inj , Howmany Whp/Tork i can got whit 15-16psi on 94oct you think Mustang Dyno TROUGH a manuel tr3650 (hope for 550-570whp) ?? Srry for Bad English :coolman:
I Got stang 04 gt and im WTB hpp kit 50mm or 57mm , 61mm or similar setup turbo or Single Like On3perfomance or hellion or homemade setup ,need fullsetup (Intercooler , Wastegate , Blowoff ,Piping etc) - Soorry for bad English héhé :coolman: